Help, I Need Leaf Springs!!!!!

[UNSTUCK]

I wont have time to get my four link set up in time for turkey day in moab. So for now I need some new springs for the back of my cj7. Here's what Im looking for: 24 inches from one spring eye to the center pin and 27 inches from the other. So 51" total length. I can always redrill the center pin hole a little bit and it's okay if my axle moves one way or the other. Stock spring height would work, or what ever. I just need to replace the the springs I have now, which are the worst springs I've ever ran.
Or can anyone give me a good name to have some built for this application? I don't want to spend a lot because I wont use them very long. But I may have no choice.
Thanks for any help.
Josh.

 

[cletus]

try best deal spring in payson theyre pretty reasonable

 

[UNSTUCK]

They build new springs or have stock of old ones?

 

[erocrocks]

they have stock, and custom there, im not sure on proce, i asked for my yj, and they wanted like over $200, plus another 75 for a extra leaf.........

i would call them and see though, thats who i know of

 

[mbryson]

I've got an extra set of Wag fronts and XJ rears if you're desperate. You may need to change some setup stuff, but if you've already cut your perches off you could make these work.

 

[UNSTUCK]

What are the measurements of those springs? and how off set is the center pin? Thanks.

 

[Brad J]

AAA Springs in SLC redid my rear springs on My Scout. They were centered originally & they cut off the eyelets on the main leaf and made a new 2" offset HD main leaf so I got some strength back and axle moved back. I don't remember price but it seems like just about $100 a corner. I've heard nobody can match thier price and quality & I've been very impressed

 

[UNSTUCK]

Anyone use Alcan springs with the orbit eye? They look pretty nice. Take a lot of the bind out of the spring, for a bit anyways. Cost?
I'll give AAA a call too. Seems like a good price. I would like to find a used set from a junk yard or something. I just wonder if I can find something with the lengths I need.