• RME Gear & Apparel

Wanted ISO 63" Chevy Springs for Tacoma swap

Herzog

Herzog

somewhat damaged
Admin
Location
Wydaho
Just checking to see if there is a good pair of spring out there before I drop money on new ones. I think I might prefer the 3 springs (minus overload) but not too sure... maybe the 2 spring version would work better?

Thanks in advance
 
1969honda

1969honda

Well-Known Member
Supporting Member
Location
Cache
Sorry, I got swamped and forgot to look at those prings. They are a set of 2005 GMC 2500 rears. The eye bushings were replaced a couple years ago. The build stalled out due other commitments and they've just been sitting bolted to a roller axle and frame. It did spend last winter outside, so some of the bushings are showing sun bleach, but never ran on the road. Make me an offer if you are interested

I also have a set of blazer K5 52s that have been fully rebuilt and sitting if you are interested.

16935821804893744283017007167030.jpg.
16935822523555248626710314895369.jpg16935822917979152945331745933110.jpg
 
Herzog

Herzog

somewhat damaged
Admin
Location
Wydaho
1969honda said:
Sorry, I got swamped and forgot to look at those prings. They are a set of 2005 GMC 2500 rears. The eye bushings were replaced a couple years ago. The build stalled out due other commitments and they've just been sitting bolted to a roller axle and frame. It did spend last winter outside, so some of the bushings are showing sun bleach, but never ran on the road. Make me an offer if you are interested

I also have a set of blazer K5 52s that have been fully rebuilt and sitting if you are interested.

View attachment 163479.
View attachment 163480View attachment 163481
Click to expand...
I appreciate you looking! Unfortunately those are too heavy for what I'm needing. Hoping for a set of 63" long with only 2 or 3 leafs in the pack.

Thanks again!
 
You must log in or register to reply here.
Top