#iwannagofast ZJ build

[STAG]

You should bring it to HooptieX. They have a class that this would fit in.

 

[N-Smooth]

Also the feel of 4.88s vs 5.13 is so negligible that its not even worth really worrying about.

This. Also, a re-gear from 4.10 to 4.88 is kind of meh IMO.

 

[Johnny Quest]

You should bring it to HooptieX. They have a class that this would fit in.

I actually thought about it but it’s not ready for something like that, especially now that it’s got an empty front diff. Maybe next year 🤷🏼‍♂️

 

[NYCEGUY01]

Hmmmmm...

Facebook

www.facebook.com

 

[1969honda]

Whoop Scissors!

 

[Johnny Quest]

Hmmmmm...

View attachment 175525

Facebook

www.facebook.com

That thing is so sweet. Suuuuuper smooth

 

[Johnny Quest]

Does anyone have any first hand experience with these Amazon R&P sets? I’m trying to piece together these axles on a (very) limited budget; I’ve got some 2nd hand ARBs that will go with these. I know these aren’t ideal, and I have heard they sometimes have vital parts missing. But sub $500 is hard to ignore. I’ll probably be attempting to set these up on my own as well because….money

https://www.amazon.com/dp/B07JCM38WY?ref=cm_sw_r_cso_cp_apan_dp_C9Q84GN7XTRREM73BTQK&ref_=cm_sw_r_cso_cp_apan_dp_C9Q84GN7XTRREM73BTQK&social_share=cm_sw_r_cso_cp_apan_dp_C9Q84GN7XTRREM73BTQK&peakEvent=2&starsLeft=1&skipTwisterOG=1

 

[I Lean]

Does anyone have any first hand experience with these Amazon R&P sets? I’m trying to piece together these axles on a (very) limited budget; I’ve got some 2nd hand ARBs that will go with these. I know these aren’t ideal, and I have heard they sometimes have vital parts missing. But sub $500 is hard to ignore. I’ll probably be attempting to set these up on my own as well because….money

https://www.amazon.com/dp/B07JCM38WY?ref=cm_sw_r_cso_cp_apan_dp_C9Q84GN7XTRREM73BTQK&ref_=cm_sw_r_cso_cp_apan_dp_C9Q84GN7XTRREM73BTQK&social_share=cm_sw_r_cso_cp_apan_dp_C9Q84GN7XTRREM73BTQK&peakEvent=2&starsLeft=1&skipTwisterOG=1

I have set up a few sets of "as cheap as can be found" gears. They have mostly all seemed fine, and I haven't heard anything after the fact to tell me they broke or whatever. 🤷‍♂️

With the size and strength of your axles, I'd probably risk it too. How bad can they be?

 

[Johnny Quest]

I have set up a few sets of "as cheap as can be found" gears. They have mostly all seemed fine, and I haven't heard anything after the fact to tell me they broke or whatever. 🤷‍♂️

With the size and strength of your axles, I'd probably risk it too. How bad can they be?

That’s kinda where I’m at too. Low(ish) power, over axle’d, medium weight. Were the ones you set up pretty easy to get a good pattern? I’ve never set any up, so this will be my first attempt.

 

[I Lean]

That’s kinda where I’m at too. Low(ish) power, over axle’d, medium weight. Were the ones you set up pretty easy to get a good pattern? I’ve never set any up, so this will be my first attempt.

I don't recall any specific issues. So they must have been OK, otherwise I'd have bitched about it and therefore remembered. 😁