- Location
- South Carolina....no public land
Hey, let me get my own thread back on track. I spent monday morning installing the driver side front control arm setup. This was only slightly more difficult than the passenger side, but it seemed to take me about 1 hour longer. Part of the problem was in removing the lower control arm mount on that side. With the driveshaft kind of in the way (I pulled the bolts from the diff end of the ds) it just made things a little more interesting.
There are a number of things that I will have to do still with the front end. Among them are the shocks (I'll need longer shocks), replace the springs (got to put the 4" tera's in), new upper shock mounts (conversion to bar type), replace some of the control arm hardware (I used the old stuff, so I will replace with new).
Next weekend, I'll be working on the rear. I'll try to take more photos!!
There are a number of things that I will have to do still with the front end. Among them are the shocks (I'll need longer shocks), replace the springs (got to put the 4" tera's in), new upper shock mounts (conversion to bar type), replace some of the control arm hardware (I used the old stuff, so I will replace with new).
Next weekend, I'll be working on the rear. I'll try to take more photos!!