Model 3 measurements

[Milner]

I want to round up the bolts and sleeves to this bender I got.
Could someone with a model 3 and a caliper measure the length of the four sleeves and 4 bolts that bolt it together. I know the bolt sizes and od's from the web site, but they don't tell you the length....I emailed JD2 about a month ago, still no reply....
Vansant wants $$$$ for the bolt/sleeves, so....

Almost forgot, I need the measurement of the spacer that goes blow the ratchet bar too. I think it is 1" tall, but whats the od?

THANKS

Marc

 

[Greg]

Wanna come take some measurements? You know how well I use a Tape Measure...

 

[Caleb]

I've got a caliper and a model 3 and can get you some measurements tonight after work if you dont already get them by then...

 

[Milner]

I've got a caliper and a model 3 and can get you some measurements tonight after work if you dont already get them by then...

Cool, thanks....I would go measure Greg's
But Happy Valley scares me!!

I want to get it all together before I order a die to build the rear bumper for the tow rig....

 

[Caleb]

alright...the two spacers on the main frame part are 3.6855 and the bolts are approx 6.75 (caliper only goes to 6") and the two spacers on the arm are 2.613 and the bolts are 4.5" long...the spacer on the bottom of the bender between the bender adn the stand is .500"...if you want any other measurements just say so (do you need length of the pins?)

BTW, if you want to (or need to) take a look you are welcome to, mornings before 9:30 or evenings after 7:00 or weekends are best...just let me know...

 

[Milner]

alright...the two spacers on the main frame part are 3.6855 and the bolts are approx 6.75 (caliper only goes to 6") and the two spacers on the arm are 2.613 and the bolts are 4.5" long...the spacer on the bottom of the bender between the bender adn the stand is .500"...if you want any other measurements just say so (do you need length of the pins?)

BTW, if you want to (or need to) take a look you are welcome to, mornings before 9:30 or evenings after 7:00 or weekends are best...just let me know...

Cool
THANKS