Need some shafts

Coreshot

Resident Thread Killer
Location
SL,UT
I took the rig out yesterday, after wrenching on the fel injection all weekend. There's an area out here in AZ alot like Little Moab, but much bigger. Anyway, the truck ran great, and it was good to get behind the wheel again.

Got into a wedgie type crack, and got bound up on the front end. Ended up breaking my passenger side inner/outer shafts on the D44. I need to order some shafts, but have to have them shipped out here in the middle of nowhere. Who's the best place for that nowadays? AllJeep? Iwould just order from Yukon, but the are wholesale only. Thanks.
 

Coreshot

Resident Thread Killer
Location
SL,UT
'78-'79 F-150 stock length short side inner and stub with u joint. Wanna go with something stronger than stock. Gonna need seals for that side also. Also need a seal for my rear end, nine inch ford with 35 spline axles.
 

Chevycrew

Well-Known Member
Location
WVC, UT
I have a set of Jantz Super Joints Im selling for $100.

I have f150 shafts, and chevy stubs, but the ears are pretty stretched.
 

dustybronco

www.sextonoffroad.com
Location
Kamas, UT
What bearing is your 35 spline running Set 20? if you don't know look and see if it is a tapered bearing or not. if it is a tapered bearing you need a whole bearing and seal it should be a set 20 if it is not a tapered bearing I would change it out anyway to one that is.

78-79 BRONCO 18.9" LH CHROME-MOLY 30 SPLINE AXLE $175
FORD BRONCO & F150 9.72" CHROME-MOLY OUTER STUB AXLE $99
SPICER FRONT AXLE U- JOINT W/ ZERK FITTING, (DSU 260-1)$36
AXLE BEARING-9 INCH SET 20 TAPERED, AK SET20 $45
SEAL-INNER AXLE-DANA 44 REVERSE $10


Or I can do the whole Chromoly axle kit 2 inners 2 outers with spicer ujoints for $450 and with Yukon Super joints for $650
 
Last edited:

dustybronco

www.sextonoffroad.com
Location
Kamas, UT
Front 4340 Chrome-Moly axle kit for '03+ and newer TJ Rubicon Dana Spicer 44

JEEP RUBICON CHROME-MOLY AXLE KIT $450 with spicer ujoints
 
Top