Wanted NP231 Transfer Case

[zmotorsports]

I am looking for a NP231 Transfer Case if anyone may have one. Anything from a Jeep, can be mid-90's well up into the mid-2000's from either Wrangler or Cherokee's.

Please contact Mike either by private message or call @ 801-552-7892.

Thank you.

 

[Gravy]

Mike, if you specify what input shaft spline you want and length: it'll help you get the right one you want easier without having to swap an input.

 

[zmotorsports]

I'm pretty sure as long as it is out of a Jeep, either Cherokee or TJ/LJ it should be what we're looking for as I didn't think they had that different of spline counts.

 

[mbryson]

I have a 23 spline 231

 

[BlueWolfFab]

I'm pretty sure as long as it is out of a Jeep, either Cherokee or TJ/LJ it should be what we're looking for as I didn't think they had that different of spline counts.

I'm 99% sure there were a few spline counts offered throughout the years and models

 

[Gravy]

I'm pretty sure as long as it is out of a Jeep, either Cherokee or TJ/LJ it should be what we're looking for as I didn't think they had that different of spline counts.

I'm 99% sure there were a few spline counts offered throughout the years and models

Exactly. 2.5L 4 cylinders and some early 4.0L 6 cylinders have 21 spline inputs. Later 4.0 "usually" are 23 spline. In addition: every single transmission offered had a different input shaft length.
Aw4, nv3550, ax5, ax15, nsg370, etc... Some can but cut shorter but none can be cut longer...

 

[Toad]

Yep three different lengths.

 

[zmotorsports]

Good to know. I thought they were all 23-spline.

Thanks for the info guys.

Mike