JeepinGuru
Show em ( o Y o )
- Location
- WesternSlope, CO
figure id start a thread of the jeep im currently working on for my women that she's now calling "Tigress"
lol
I'm by no means some master fabricator / expert welder with a huge budget to throw at this so be easy on me
Starting out with a 93 YJ with a CJ-7 hood & grill
![429909_2325064185620_625348511_n.jpg 429909_2325064185620_625348511_n.jpg](https://www.rme4x4.com/data/attachments/37/37272-368a9ce8d66bf1c096d972a119852bef.jpg)
Plans
6.0 Vortec
Th350
D300
D60
14bolt
anything else will be figured out as i go :greg:
Heep of parts i have so far
![464501_2781005783875_600065472_o.jpg 464501_2781005783875_600065472_o.jpg](https://www.rme4x4.com/data/attachments/37/37273-49140657fdd3b7197604a9f865ab61c0.jpg)
![426398_2477363273002_339716111_n.jpg 426398_2477363273002_339716111_n.jpg](https://www.rme4x4.com/data/attachments/37/37274-8d8524834360a4dd6affd43bfa87d4ec.jpg)
So the first thing ive decided to tackle is get the wiring for the engine worked out and remove anything from it I don't need
![416902_2502176773324_948117404_n.jpg 416902_2502176773324_948117404_n.jpg](https://www.rme4x4.com/data/attachments/37/37275-4cb086595615b1f0b695cfd188d9acb8.jpg)
![423458_2502178253361_722937485_n.jpg 423458_2502178253361_722937485_n.jpg](https://www.rme4x4.com/data/attachments/37/37281-91d783f19d5cf43010a35ad43a26ff7f.jpg)
Blue & Green Connectors depinned and labeled.
![64842_2502222414465_25808967_n.jpg 64842_2502222414465_25808967_n.jpg](https://www.rme4x4.com/data/attachments/37/37277-e54ad2745b0151c36b9660b3ff96f5ae.jpg)
All wires bundled & labeled
![424907_2502223654496_1318348944_n.jpg 424907_2502223654496_1318348944_n.jpg](https://www.rme4x4.com/data/attachments/37/37278-17201231644d5154422b34205277a71f.jpg)
Few fuse blocks and Relay holders for the new harness
![426028_2489396613828_1889697457_n.jpg 426028_2489396613828_1889697457_n.jpg](https://www.rme4x4.com/data/attachments/37/37279-c6b8f48c05b25f95c638e69dd1e52276.jpg)
![416821_2489562457974_976520950_n.jpg 416821_2489562457974_976520950_n.jpg](https://www.rme4x4.com/data/attachments/37/37280-f628e69d5652b83bb46614c7a8253ee4.jpg)
Next ill work on getting the engine mounted to figure out where im gonna run the harness in to the cab and lengthen / shorten any wires on the engine harness.
I'm by no means some master fabricator / expert welder with a huge budget to throw at this so be easy on me
Starting out with a 93 YJ with a CJ-7 hood & grill
![429909_2325064185620_625348511_n.jpg 429909_2325064185620_625348511_n.jpg](https://www.rme4x4.com/data/attachments/37/37272-368a9ce8d66bf1c096d972a119852bef.jpg)
Plans
6.0 Vortec
Th350
D300
D60
14bolt
anything else will be figured out as i go :greg:
Heep of parts i have so far
![464501_2781005783875_600065472_o.jpg 464501_2781005783875_600065472_o.jpg](https://www.rme4x4.com/data/attachments/37/37273-49140657fdd3b7197604a9f865ab61c0.jpg)
![426398_2477363273002_339716111_n.jpg 426398_2477363273002_339716111_n.jpg](https://www.rme4x4.com/data/attachments/37/37274-8d8524834360a4dd6affd43bfa87d4ec.jpg)
So the first thing ive decided to tackle is get the wiring for the engine worked out and remove anything from it I don't need
![416902_2502176773324_948117404_n.jpg 416902_2502176773324_948117404_n.jpg](https://www.rme4x4.com/data/attachments/37/37275-4cb086595615b1f0b695cfd188d9acb8.jpg)
![423458_2502178253361_722937485_n.jpg 423458_2502178253361_722937485_n.jpg](https://www.rme4x4.com/data/attachments/37/37281-91d783f19d5cf43010a35ad43a26ff7f.jpg)
Blue & Green Connectors depinned and labeled.
![64842_2502222414465_25808967_n.jpg 64842_2502222414465_25808967_n.jpg](https://www.rme4x4.com/data/attachments/37/37277-e54ad2745b0151c36b9660b3ff96f5ae.jpg)
All wires bundled & labeled
![424907_2502223654496_1318348944_n.jpg 424907_2502223654496_1318348944_n.jpg](https://www.rme4x4.com/data/attachments/37/37278-17201231644d5154422b34205277a71f.jpg)
Few fuse blocks and Relay holders for the new harness
![426028_2489396613828_1889697457_n.jpg 426028_2489396613828_1889697457_n.jpg](https://www.rme4x4.com/data/attachments/37/37279-c6b8f48c05b25f95c638e69dd1e52276.jpg)
![416821_2489562457974_976520950_n.jpg 416821_2489562457974_976520950_n.jpg](https://www.rme4x4.com/data/attachments/37/37280-f628e69d5652b83bb46614c7a8253ee4.jpg)
Next ill work on getting the engine mounted to figure out where im gonna run the harness in to the cab and lengthen / shorten any wires on the engine harness.
Attachments
Last edited: