radiator hose problem. input needed.

[broncomitch]

k, the problem is the lower radiator hose.

the outlet on the pump is shooting off to the left (driver)

and the rad the hose goes on the right.

easy fix run a pipe along blah blah.

so the question..

what type of pipe or hose?

ill never find a rad hose like that,i want to use steal cus i have lot's of it but it rust's,don't want to use plastic cus it can melt.

now i can take the front timing cover and everything off the 302 and put it on the Windsor but i don't want to take ether motor apart and be stuck with the same problem.

any suggestions would be helpful..

 

[mbryson]

Mebbe some stainless exhaust tubing?

 

[Erik d_lux]

I will never use another radiator hose other than these again. They will fit anything and reasonably priced IMO.

http://www.summitracing.com/parts/SUM-390124/

 

[SnwMnkys]

Ive got the same issue on my EB. I just ran two flexible radiator hoses with a small peice of tubing coupling between them. Has ran fine like this for quite a while.