snakes and con 11/19/05
- Thread starter chadschoon
- Start date
KToy said:
Yup, so far they're working out well. As for comparing to regular shocks, I couldn't say- I've never had shocks on this truck before.
I used Airshox because the truck had the typical 'Yota lean. It leaned nearly 2 inches toward the pass. side. The Airshox leveled it out nicely.
sixstringsteve
Well-Known Member
- Location
- UT
mineral basin
I haven't done mineral basin yet. How would that be for a night run? I could only do it on thanksgiving or some random night.
richpblaze said:Lost them somehow triing to transfer.
I haven't done mineral basin yet. How would that be for a night run? I could only do it on thanksgiving or some random night.
wildkid
...Jeepless...
- Location
- By Cabela's
waynehartwig said:
Yeah, that would be cool! I wanted to get the 30-spline also. I was checking out prices on 4x4groupbuy.com. PM or e-mail me with what info you'll need from me for the shafts.
-Thanks
KToy
Well-Known Member
- Location
- Herriman, UT
thats a good idea coreshot my truck has the famous toy lean as well. ill have to check it out sometime and see if i like it and throw some on my truck, then later throw the 4link in.
sixstringsteve
Well-Known Member
- Location
- UT
video clips
here's the link to the video highlights i took. I'm obviously not a great photographer, but you guys might enjoy seeing your vehicle make it up. I wasn't able to make it out to con to film that, sorry.
http://www.youtube.com/?v=-3A7pllltds
here's the link to the video highlights i took. I'm obviously not a great photographer, but you guys might enjoy seeing your vehicle make it up. I wasn't able to make it out to con to film that, sorry.
http://www.youtube.com/?v=-3A7pllltds
waynehartwig
www.jeeperman.com
- Location
- Mead, WA
I was refferring to the weld you were doing right on the trail...On 12 volts that welder wasn't doing very good... Not the fact that one of your welds came apart. Bad joke went wrongCoreshot said:Everything on my truck was welded by me. This is the first weld to come apart. How much of your rig was not bolted on? Welded by you?
Everything has been bolted on and or welded by me, whatever the case may be....
waynehartwig
www.jeeperman.com
- Location
- Mead, WA
I will! I'm working on getting set up as a dealer (have been for about 2 weeks now), but their fax machine doesn't pick up and I haven't been persistent enough on it to call them on it. Now I have incentive!wildkid said:Yeah, that would be cool! I wanted to get the 30-spline also. I was checking out prices on 4x4groupbuy.com. PM or e-mail me with what info you'll need from me for the shafts.
-Thanks
I took my rig apart this morning, and it did bust the drivers side axle - right at the end of the splines and now I can't get the splined portion out of the differential. So I took apart the other side to see if I could knock it through (I don't want to take my diff out if I can help it). No luck... But when I took it apart, I noticed that one is getting close to going south also....The splines are already twisted almost a full spline over. Sooooo.... Rip the diff out today after breakfast, get the rest of it out, and inspect everything. Maybe put a mini install kit in (bearings and seals) while I have it all apart.
I'll call them in the morning and get everything going and coming for both our rigs...
waynehartwig
www.jeeperman.com
- Location
- Mead, WA
Just givin' ya sh1t!Coreshot said:Hmmm... I don't know where I got the idea you were bagging on my fabrication abilities...
WayneXJ
grocery getter driver
- Location
- So. Jordan
Didn't someone make it up Wayne's World in one try?
James K
NO, I'm always like this
- Location
- Taylorsville, Ut
hmmm..........................who was that?..........................oh thats right it was youWayneXJ said:Didn't someone make it up Wayne's World in one try?
James K
NO, I'm always like this
- Location
- Taylorsville, Ut
yes, it is :greg:Coreshot said:cool video.
waynehartwig
www.jeeperman.com
- Location
- Mead, WA
Got it all apart (differential, too).... Took out the drivers axle and twisted the splines up on the passenger axle. It also took out my diff bearings on the passenger side. I just finished up putting a mini install kit in and then next week (hopefully) will be the alloy axles. Oh, it also broke the locker engagement sensor... I also have a big dent in my oil pan and a busted rock light. I would bet those were done when I backed off eagles nest.....
edit: Come to find out I have 4.56 gears and not 4.10's... I thought 4.56's were only in automatics?
edit: Come to find out I have 4.56 gears and not 4.10's... I thought 4.56's were only in automatics?
Last edited:
chadschoon
Well-Known Member
- Location
- lehi
so who all made it up waynes world???
me
james
coreshot
tan runner?
big zuk, i think thats his name
who else, i know there was more
me
james
coreshot
tan runner?
big zuk, i think thats his name
who else, i know there was more
wildkid
...Jeepless...
- Location
- By Cabela's
I also need to get those new style RE bushings to replace my old junk with.
waynehartwig
www.jeeperman.com
- Location
- Mead, WA
I think everyone but me and wildkidchadschoon said:
