Wanted Stock d30 shaft.
- Thread starter Omgbecki
- Start date
- Location
- Grantsville, Utah
@SoopaHick has a pair of D30 shafts in my loft he might be willing to part with.
astjp2
Active Member
- Location
- Riverdale/Alaska
I have a pair sitting in my car port, $20 for the pair. I am off of 2700n in Pleasant view. Tim
I guess I should ask what they came out of as well. They will be going into a 2004 TJ. Might as well go up to the 760x since they'll be out
astjp2
Active Member
- Location
- Riverdale/Alaska
XJ stock shafts...
- Location
- West Jordan
Just make sure the shafts you get have the larger joints. All TJ, and post '95(?) XJ shafts will all be the bigger 297/760 joint size. Earlier shafts will have the smaller 260 joints, and aren't worth bothering with.
- Location
- West Haven, UT
I'll look tonight also, I think we still have the OEM front shafts out of my son's LJ.
Mike
Mike
- Location
- West Haven, UT
I just looked and I have a set of Dana 30 front axle shafts if you still need a set.
Mike
Mike
astjp2
Active Member
- Location
- Riverdale/Alaska
LJ are too long..he needs XJ. Tim
- Location
- Bountiful, land of rocks
- Location
- West Haven, UT
Exactly, the D30's under the LJ, TJ and XJ are all the same, the JK's are however longer. Even the ZJ's and WJ's D30's are the same as the previously mentioned but originally they were CV style but are interchangeable with u-joint style shafts.
Mike
I'm 99% sure WJ axles are wider than all the rest of those...
- Location
- West Haven, UT
You may be correct. I cannot confirm the WJ is the same as the others but can that the TJ/LJ/XJ/ZJ are all interchangeable. I may have taken a liberty with stating the WJ is the same as I have not interchanged axle shafts into one of those specifically.
Thanks for the correction.
Mike