Jeep TJ/LJ cooling upgrade.

gijohn40

too poor to wheel... :(
Location
Layton, Utah
Today I took my old cooling fan and clutch out of my LJ and removed the fan. I replaced it with a 10 blade fan from a 91 Ford Explorer. The bolt holes needed to be enlarged one step on a step bit. other then that it installed easy.

I use to run between 205 and 210 degrees. Today I was running 195-200 degrees.
 

Attachments

  • 20180315_123122.jpg
    20180315_123122.jpg
    734.7 KB · Views: 21
  • 20180315_123743.jpg
    20180315_123743.jpg
    615.9 KB · Views: 22
  • 20180315_123750.jpg
    20180315_123750.jpg
    610.3 KB · Views: 26
  • 20180315_124124.jpg
    20180315_124124.jpg
    604.7 KB · Views: 25
Last edited:

AaronPaige

Well-Known Member
Location
Price ut
Only 20 bucks! I had to replace my radiator so I went to an all aluminum that works great but why not...thanks for sharing
 

gijohn40

too poor to wheel... :(
Location
Layton, Utah
Ok now that the summer heat is starting to climb I still have a problem... yesterday when it was 89 degrees out and I was driving home on I-15 doing 70-75 with the AC running I looked at my gauge and the temp was 230 degrees! I shut the AC off and it dropped slowly to 224 and stayed there...

Once I got off the freeway and down to slower speed the temps dropped down to 210 pretty quickly and stayed between 200-210.
Seems that I have an air flow issue at higher speeds. I have a hood vent that I need to install which I am sure will help but what else has everyone done to bring the temps down at speed?
 

Omgbecki

Well-Known Member
Location
Ogden
Which fan are you running? You have any air trapped in the coolant system? Old oil? I can't say I've had this problem with my jeep but I have had this issue with other vehicles with those first three questions being the reason why
 
Top