Shop / Tools Today I want this...tool edition

[Greg]

View attachment 136058
View attachment 136059
I don’t really want one, but I could imagine 80,000 ft lbs of torque would hold some stuff together pretty well.

I'm not sure you have big enough nuts (or bolts) to run that thing!

 

[Herzog]

That might get the evergreen boat unstuck

 

[Stephen]

View attachment 136058
View attachment 136059
I don’t really want one, but I could imagine 80,000 ft lbs of torque would hold some stuff together pretty well.

I once broke two 30mm impact sockets trying to get a rusted hub nut off a ‘96 Jetta. I feel like 80,000 ft lbs would have been just the ticket.

 

[Unimog]

I just want to see someone stack adapters to adapt the 3 1/2" drive down to 3/4 or 1/2 and just see how fast you can break stuff with it!

 

[Trate D]

Protolabs on Instagram: "Automatic bending machine. High speed and high efficiency! via: @hsskmt . . . . #industrial #tools #fabrication #manufacturing #metalworking #engineering #machining #instamachinist #machinist #satisfyingvideos #instamach

3,944 likes, 43 comments - protolabsmfg on April 4, 2021: "Automatic bending machine. High speed and high efficiency! via: @hsskmt . . . . #industrial #tools #fabrication #manufacturing #metalworking #engineering #machining #instamachinist #machinist #satisfyingvideos #instamachining...

www.instagram.com

 

[Hickey]

I really want to set up my flatdeck trailer with one of those arm cranes. Maybe not quite this heavy duty, but the convenience of an arm crane on a trailer would be phenomenal.
View attachment 136275

I used to run a few of those at my first driving job. We used them for loading and unloading crates of glass. They were occasionally used for axle swaps and axle deliveries by some employees. 😁

I really enjoyed running those cranes.

 

[jeeper]

I really want to set up my flatdeck trailer with one of those arm cranes. Maybe not quite this heavy duty, but the convenience of an arm crane on a trailer would be phenomenal.
View attachment 136275

Just that jack stand alone would require a crane!

 

[zmotorsports]

Just that jack stand alone would require a crane!

That is what I was eyeballing. That jackstand looks pretty stout in its own right.

Mike

 

[jeeper]

I would like to buy this dolly today if possible locally in the Salt Lake Valley. Does anybody know where I could find such a thing?

 

[I Lean]

I would like to buy this dolly today if possible locally in the Salt Lake Valley. Does anybody know where I could find such a thing?

View attachment 139283

Don't know for sure, but try A-1 Casters?

 

[I Lean]

I would like to buy this dolly today if possible locally in the Salt Lake Valley. Does anybody know where I could find such a thing?

View attachment 139283

Or, Home Depot?

mount-it! Stair Climber Hand Truck and Dolly MI-913 - The Home Depot

Handle your wide variety of tightening and fastening tasks efficiently with the addition of this excellent mount it Stair Climber Hand Truck and Dolly.

www.homedepot.com

 

[jeeper]

Thanks guys. I was unable to find the exact one I wanted, so I went with just a Typical appliance dolly. But it was still way better than my normal hand truck. Grateful I bought it.

 

[YROC FAB.]

I'm not sure you have big enough nuts (or bolts) to run that thing!

I do

 

[Herzog]

This is clever:

 

[N-Smooth]

Add a roomba brain to that bad boy and never sweep your shop again

 

[RockChucker]

View this content on Instagram

View this content on Instagram

I don’t know why, but now I want pliers than can pick up a nickel from the edge. Language warning FYI

 

[TRD270]

Remember that request to not see a thread.......

 

[TRD270]

Well today I learned I didn’t need a new tool….. despite looking 😬

 

[I Lean]

Well today I learned I didn’t need a new tool….. despite looking 😬
View attachment 157967

You picked it up with a different Snap-On plier though. Not fair. Let's see it with a Great Neck, with a bent tip. (I happen to have one of these available...)

 

[TRD270]

You picked it up with a different Snap-On plier though. Not fair. Let's see it with a Great Neck, with a bent tip. (I happen to have one of these available...)

Well if i'm honest thats the only one that would pick it up I tried with my other needle nose (to include bent tip)