Toyota brakelines to GM caliper?

[Greg]

I've been looking for a source to adapt the Metric fittings of a Toyota to the GM Banjo fitting on a Dana 44. Has anyone found a part number or item that would do the job?

 

[Milner]

Circle track shops should have the build your own lines....Just use the ends you need....If you were still here EVCO has them now too.

Some of the gm calipers have a metric banjo bolt....I have bought rebuilt ones with the same part # and one was sae and one was metric

 

[James K]

how big of a difference is the hole size on the banjo, between gm and toyota?

I know on my front brake lines I was able to drill the banjo out slightly larger to accept the gm banjo bolt.

the lines on the front of mine are for a ranger.

 

[Hickey]

how big of a difference is the hole size on the banjo, between gm and toyota?

I know on my front brake lines I was able to drill the banjo out slightly larger to accept the gm banjo bolt.

I have done this too, with great success. Does the Toyota axle use banjo bolts?

 

[I Lean]

I have done this too, with great success. Does the Toyota axle use banjo bolts?

Nope.

Easiest way to go is to get a new soft line, with a metric fitting on the frame side and the correct banjo on the axle side. That line can be SS or rubber, depending on where you get it.

 

[Hickey]

Nope.

I thought not.

 

[Greg]

I tried a couple local parts stores, none of them will touch brakelines (understandably) and there's no 'House of Hose' around here. I'm not sure what to do next.

 

[Hickey]

Probably a bit of a drive for you, but check out this thread.
http://www.pirate4x4.com/forum/showthread.php?t=265966&highlight=banjo+bolt

 

[Greg]

Probably a bit of a drive for you, but check out this thread.
http://www.pirate4x4.com/forum/showthread.php?t=265966&highlight=banjo+bolt

Actually, Ontario isn't too far. I'm in the area once in awhile, even then it sounds like I could just order it over the phone. Not a bad price, thanks for the linky Jer!

 

[Hickey]

Actually, Ontario isn't too far. I'm in the area once in awhile, even then it sounds like I could just order it over the phone. Not a bad price, thanks for the linky Jer!

No problem. I don't mind being your search whore. And that is a killer price.

 

[Greg]

No problem. I don't mind being your search whore. And that is a killer price.

You done good!