Trackbar and bad brakes

[dash]

So went to moab was having fun. My xj decided to develop bad brakes half way though and made fins and things much more of a challenge. This allowed to track bar to give out. I made it but the drive was no Bueno. I would love a heavy duty trackbar for 3.5 in lift but the ones I have looked at are for 4" plus. Can I make it work on mine?
As far as brakes- the pedal goes to the floor. I was pumping them I thought it was helping but I am not for sure. Ideas?

 

[Jeromy]

Might be bad master cylinder on the brake issue. No brakes at all? Look for broken lines too. What broke on the track bar?

 

[dash]

right now it has a relocation bracket and I just run a cheapo one. the lower bushing tends to blow after one good trip. As far as brakes- the lines are intact and the everything looks ok. it it the master cylinder or the brake booster or both?

 

[Jeromy]

no pedal at all I'd think the master. Brake booster helps you press harder on pedal. If it's acting up you might have a hard pedal or a low pedal but still some brakes usually.

I never liked relocation brackets. Always seemed to come loose. I'd bet if you got a good adjustable one you'd be close enough with your 3.5" to a 4inch one. Or lift front a bit more too.

 

[Jeromy]

Rubicon express re1600 track bar is 2.5-5.5. I believe it was what I ran on one of my old xj's

 

[dash]

I will look for that trackbar thanks for the help

 

[deepthinker]

I think what you are looking for is the Iron Rock Offroad's double shear trackbar.