Trying to find a cheap trail bike, need help....

193kyle

Well-Known Member
Location
Chattanooga, TN
Here you go Rick, taken up AF Canyon this morning.

DSCN2858.jpg


DSCN2854.jpg


DSCN2849.jpg
 

193kyle

Well-Known Member
Location
Chattanooga, TN
Fixed-ish, haha. The clutch hydraulics are good now after the new master cylinder and slave rebuild, but the clutch still drags a little with the lever pulled. The only other thing I can think of is that the basket is worn, but I haven't torn into that yet since it is perfectly rideable as is. I also swapped the 14t front sprocket for a 13t. Much better for the technical stuff, this thing chugs along pretty good now. Oh, and the Scotts steering stabilizer is awesome!!!
 

Caleb

Well-Known Member
Location
Riverton
FWIW, tearing in to the clutch to check the basket will take about 10 minutes total. Shut the fuel off, lay the bike on it's side, remove the 6 or so bolts, pull the clutch plates out and check out the basket. Super simple. Also, if you haven't torn in yet, then I would assume you haven't checked out the clutch pack either, a new Tusk pack (for steels and friction plates) is only like $30 or so. Just an FYI :D

Good looking bike BTW.
 
Top