Using a tow bar on a truggy with full hydraulic steering.

BillysBuggy

New Member
I just installed full hydraulic ram steering on my truggy. For short trips I just use a tow bar. When turning the front tires drag and look like they are going to come off the bead. The hubs are unlocked but the axle wont steer because of the hydraulics. Would it be best to install a bypass on the hydraulic lines or is there something else I can do
 

Kiel

Formerly WJ ZUK
Its because there is no mechanical linkage in the steering to get any feedback and roll the way the tires are facing. Have you ever tried to move a hydraulic steering rigs tires when its on the ground and not running. You pretty much can't without a lot of force. Trailer it
 

BillysBuggy

New Member
Dang it I was afraid of that. I was trying for the cheap way out. I have tried to move it manually and yeah its not really happening.
 

ricsrx

Well-Known Member
I did the same thing on Hunters truck, it wont track while turning but tracks good going strait.

I was only going to use the bar in an emergency or on dirt roads from the trailer to the trail head.
 
Top