Wanted Wanted, Jeep TJ front bumper bolts

[lhracing]

I am looking for a set of the Torx bolts (M12) that mount the bumper on a TJ.

 

[DAA]

I'll check later to see if I still have them.

Can't remember if I gave them away with the bumper or not.

- DAA

 

[DAA]

Not sure if these are what you need or not. Diameter is .492 which doesn’t quite jibe?

- DAA

 

[DAA]

You know, I "think" these were actually from one corner of the factory seats.

- DAA

 

[bryson]

I might have some... You need 2 or 4?

 

[lhracing]

Those may be the ones, 12mm is just a little smaller than a 1/2 inch. from what I can find they should be M12 - 1.75mm x 65mm.

 

[DAA]

Yours for the taking!

- DAA

 

[skippy]

I always drill them out and tap them to be 1/2” NC bolts but that’s cause it’s easier and faster than tracking down metric hardware