Wanted: Jeep Wagoneer Dana 44 Front

[TheSpecialist]

Looking for a narrow track D44 (61.5") with 4.88s. Passenger side drop.

I am going to give it awhile looking for a 4.88, but will need one reguardless. If you have a stock one, I would be interested.

 

[TheSpecialist]

Still need. TTT

 

[huntinkid]

http://www.ksl.com/index.php?nid=218&ad=18351773&cat=&lpid=6&search=dana 44 i texted you about this one earlier in the week

 

[TheSpecialist]

Thanks Huntinkid!!! I saw this one. Its non-flat tops, but considering. Anyone have one with 4.88 or 4.10's?

 

[Bart]

I have a drilled and tapped flat top for one if you end up needing one.

 

[I Lean]

I have a housing that you can have for your donor, if you'd like. It's missing the passenger side knuckle, and all the outers. It's free though....

 

[TheSpecialist]

Is it a narrow FSJ SUA? Where is it located?

 

[TheSpecialist]

Thanks I Lean. I will come this weekend. Bart, do you have a driver or passenger knuckle?

 

[zukijames]

i have i belive a waggy 44 with high steer knuckles and arms , locker and 5.89s, ctm joints , chromo shafts.. passanger side diff. have a matching rear.. off set to pass side also..

 

[TheSpecialist]

Sent you an email zukijames. Your message center is full.

 

[Bart]

Passenger side flat top knuckle, drilled and tapped.

 

[DaveB]

I have some 6 lug hubs, rotors, spindles and calipers that will fit on the axle if you need those. Knuckles too but only flat top on the driver side.

 

[Lifelong Jeeper]

There is one at Pic-n-pulll in South Salt Lake, at least there was a couple of weeks ago.

 

[TheSpecialist]

I got the free housing from I LEAN, but would still like to find a built axle in 4.10-4.88 before I get too far. Bueller?