What projects do you have on your plate....

[spencurai]

Originally posted by Andy



Why do you need a reverse light? It just warns who ever you just ran over that your coming back for seconds, sierra club member/ hiker..... you get the picture.

true true, I just want lights everywhere, rocklight style but I only have 2 or 3 tractor light assemblies left in my stash....

 

[SAMI]

I get to:

-Paint my new lazer cut shackles and brackets
-Paint my new wheel
-Find a full size spare
-Intall all of that
-Upgrade my steering to beefier arms
-Get a 4:1 t-case
-Upgrade to Toyota axles
-Lock them with something
-Get or make a roll cage
-Help Wort with his list
-Throw on some fresh paint
-Find out why, and fix my idle speed of 3,000rpm
-Get some rock lights
-Find a good rear bumper
-Get a swing away tire carrier
-Buy a Toyota for some real off-roading!


I am a charity case so feel free to donate any of this.

 

[Herzog]

I'm just happy that my list is getting shorter!

- Strip the interior
- Internal Cage (also tied into the upper pillars of my uni-body)
- Refine rear suspension, again.

And definately by mid-summer:

- rear 60
- OBA

 

[jhama78]

Heres my junk..... got a looong list of stuff.......

Finish SAS... grind frame more, weld on permanent spring hangers and shackle hangers

Install engine trans and t-case weld in motor mounts

Install fuel cell, pump, regulators and lines.

Wire entire truck

Install front calipers, brake lines and bleed system

Install new bed

Paint and bodywork

Mount and install tires....

Im sure theres enough more to double the length of this list but I wont remember until I have to do it.

l8r

-j-rOd

 

[Turbobob]

Finish cage
Get beadlocks
Spare tire carrier
More body armor
Paint job
Fix winch
Get more $$$ to finish projects!

 

[84 4Runner]

-Bring 22R (and attached Celica) home
-Pull 22R and rebuild/build up
-Swap rebuilt 22R with current 22R
-Re-sand and re-paint
-Build shockmounts and buy longer shocks
-5:29s hopefully ($$)
-Crossover hopefully ($$)
-Crawler maybe ($$)
-And the list goes on....

I am willing to take any donations of $$ or parts or even labor.

 

[jhama78]

Originally posted by jhama78
Heres my junk..... got a looong list of stuff.......

Finish SAS... grind frame more, weld on permanent spring hangers and shackle hangers

Install engine trans and t-case weld in motor mounts

Install fuel cell, pump, regulators and lines.

Wire entire truck

Install front calipers, brake lines and bleed system

Install new bed

Paint and bodywork

Mount and install tires....

Im sure theres enough more to double the length of this list but I wont remember until I have to do it.

l8r

-j-rOd

::UPDATE!!::

Heres a pile of stuff that I got from summit yesterday.... more junk for my junk

 

[xjc]

my list of things to do

heldorado
hells revenge
spike
rubicon
...


Not alot of money to spend right now so might as well buy gas

 

[NoTrax]

-Wire Power Windows.


Lol @ greg


Things id like to do that wouldnt hopefull cost too much money

- Find a poor slob to help me make a roll cage, or exo cage.
- Make Diff skids, and gas tank skid.
- Build Tire carrier
- Re carpet the inside.


Stuff I need much moula for.

- D44 F/R (require SAS) Ill prolly skip this and do a Calmini for awhile
- 5.88's
- Locked F/R
- 4.1 T case
- Replace clutch with alot heavier duty one.
- 33" Mt/r's or BFG KM Or TSL Trxus.

5+ years. Tear body off, make a comp buggy from tracker frame stretch to 105"
Run 37" Swampers D60 Rear d44 front.
All kinds of other specifics...

Oh ya... get a tow rig

Get Brandon to sponsor the whole thing

 

[spencurai]

re-carpet the inside.....


LOL @ liltrax.... carpet is for sissys......

 

[xjc]

.

SS, aluminum, or paint-on bed liner inside and out. Anything you have, keep it, but if youre replacing anything, do it hard core. Paint, carpet, and all that is for sissys. The only justifiable padding is the seat and the pink dice hanging from the mirror

I guess there is one more exception, I have my smaller brackets zinc plated (got connections)cuz it protects better than any paint. Gota paint the zinc though, can't have any shiny bling bling

 

[mbryson]

I guess I'm a poser 'cause I like carpet and nice paint.....

 

[spencurai]

Originally posted by mbryson
I guess I'm a poser 'cause I like carpet and nice paint.....

paint is just to keep things from rusting. carpet is just to keep things quiet. I find that rubber floor-mats accomplish the same thing.

 

[NoTrax]

lol, I need carpet to keep the damn noise down!

Dont need to hear my mt/r's crusing down the freeway yo!

plus all the bling bling I need is my system!

Wondering how long it will be till I have no tunes in my rig ..... I am hoping sooner than later, just means ill be that much close to legit!

 

[NoTrax]

By the way spence....


Rubber floor mats + convertable + water + moisture of any kind = RUST!!!!!


Anyways another question... Getting my intertior rhino lined.. thoughts? Im talking pull the carpet, the seats and take it down to Rhino Lining place on Main street, how do I hide all my wires and junk, This is an option for me..

PLus cost.. its a tracker so not alot of area to rhino line, very little..

 

[Greg]

Originally posted by spencurai
re-carpet the inside.....


LOL @ liltrax.... carpet is for sissys......

Thats what I thought when I read it..... Laugh at my Windows, then mention your CARPET!

 

[BlackSheep]

Originally posted by LiltraxUtah
By the way spence....


Rubber floor mats + convertable + water + moisture of any kind = RUST!!!!!


Anyways another question... Getting my intertior rhino lined.. thoughts? Im talking pull the carpet, the seats and take it down to Rhino Lining place on Main street, how do I hide all my wires and junk, This is an option for me..

PLus cost.. its a tracker so not alot of area to rhino line, very little..

I would suggest going and buying the herculiner. For less than a benjamin you can do it yourself and you don't have to worry so much about your wires and what not (you decide how you deal with them when you are brushing it on.

Lots of comments have been made on the different liners out there (I use some stuff I bought at walmart. The key, as with any painting or surface covering, is in the prep. I am amazed at how well this $35/gallon stuff has held up. I did spend more time prepping the surface than actually applying the liner, so I think that effort paid off.

jd

 

[NoTrax]

I wasnt aware that the do it yourself stuff was any good, do you prepare the surface the same as a normal painted service?

Rough it up and clean it?

 

[xjc]

.

I've never done it but I hear it needs to be very clean. If it has ever had any oil on it you probably need to clean it with solvant. I am sure it has good instructions on the can. I don't think I would ever pay anyone to do it for me. The prof. stuff is too expensive compared to the WalMart special.

 

[spencurai]

Originally posted by LiltraxUtah
By the way spence....


Rubber floor mats + convertable + water + moisture of any kind = RUST!!!!!

been doing it for years....no rust so far.

your carpet will hold more moisture over a larger area than will a little rubber mat. if you keep your metal painted, no rust will occur.

go with the DIY liner stuff. Blacksheep did it to his TJ and it is TIGHT!!! I really like how it turned out!