For Sale Willys Crawler project

[Greg]

Asking Price

$5000

With some work changes and other projects, I haven't had time to work on this thing in over a year... and that's probably not going to change any time soon. I hate to do it, but it's time to let this go. This is a PROJECT, it started as a ground-up build with a lot of custom fab. There is still a ton of fab work needed, but plenty of options to make it yours.

Specs;

• 2" x 4" x 3/16" thick frame, built to stretch the wheelbase with link suspension in mind.
• 2005 Vortec 4.3 MPFI (the good one) with 90k miles (90k miles, heard it run before pulled)
• GM 4L60E 'K' Case
• Dana 300
• 208 adapter with JB Conversions stub shaft to connect Trans & T-case
• JBA Shorty headers
• Dana 44 rear with 5.38's, Detroit locker, 33 spine 4130 shafts, disc brakes
• Dana 44 front with 5.38's, 4130 shafts, Warn hubs, Detroit locker, disc brakes
• 4 link rear suspension, 3 link front with track bar. Built with BEEFY RuffStuff heims, tube, mounts, etc.
• Pair of 14" Fox Coilovers with remote res.
• 4 BEEFY shock towers.
• Set of 5 35" Maxxis Short Course tires
• MB Grill
• Aftermarket tub, stretched 8" at the door. Rear wheelwell opened up to fit 36" diameter tire.
• CJ2A windshield frame
• CJ2A fenders

The front axle was pushed forward a LOT, rear pushed back a bit and should have around 100" wheelbase. I was going to run full hydro, but if you got creative you could probably get a steering box on it. Most of the links are just tacked up, so if you wanted to pull the front axle back you could.

Not parting it out, buy it all or nothing. I'm not desperate to sell either, to the price is FIRM.

No title, can provide Bill of Sale. Located in Grand Junction, CO.

You can find all the details in the build thread - https://www.rme4x4.com/threads/willys-crawler-project.111622/

Here's some pics-

 

[Herzog]

So much potential in this. If I had the room I'd pick it up. Hope it stays in the RME fam!

 

[YROC FAB.]

interested in the coilovers.

 

[Greg]

interested in the coilovers.

Not parting it out, though.

 

[YROC FAB.]

Not parting it out, though.

let me know

 

[Bart]

DROOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOL, dang, this is bad timing. Love this project.

 

[Greg]

Well, it's going to the wolves on Facebook/KSL/Craigslist....

 

[cjncustoms]

Soooo much want!!

 

[Greg]

Soooo much want!!

Come get it, you need another toy! ?

 

[Stephen]

Well, it's going to the wolves on Facebook/KSL/Craigslist....

Whats the lowest you'll take... I'd be willing to trade you two ball point pens, an AR lower and a roll of toilet paper...

 

[Greg]

Whats the lowest you'll take... I'd be willing to trade you two ball point pens, an AR lower and a roll of toilet paper...

I haven't had a single lowball or ridiculous, one-sided trade offer! But the ad I wrote for FB/CL/KSL/Pirate is a bit more harsh than this one.

 

[NYCEGUY01]

I haven't had a single lowball or ridiculous, one-sided trade offer!

Well...... I guess we can start at $500 for your old rusty jeep that doesn't even run... Who will give $501....lol

 

[Noahfecks]

I haven't had a single lowball or ridiculous, one-sided trade offer! But the ad I wrote for FB/CL/KSL/Pirate is a bit more harsh than this one.

Not true, I offer to take the tires if you part it out which was clearly ridiculous given your FB ad

 

[Greg]

SOLD!!!

 

[Bart]

Glad this if finally gone so I can quit scheming on how to afford it.

 

[notajeep]

Glad this if finally gone so I can quit scheming on how to afford it.

You and me both

 

[Greg]

I know that there's an RME member who is pretty excited about this....

 

[Herzog]

I know that there's an RME member who is pretty excited about this....

oooohhhh Glad it's still in the RME fam.

 

[Greg]

oooohhhh Glad it's still in the RME fam.

Me too, sounds like the build thread will continue as well.... which is awesome. I'm excited for the new owner, it will be a bit before he picks it up, but he is a good fit for it.