Your Pic of The Day

Kevin B.

Not often wrong. Never quite right.
Moderator
Location
Stinkwater
1712528573047.png
1712528585343.png
1712528600308.png

Been beating on this bish for about three days now, alternating between heat and soaking in oil, and my butt is well and truly kicked. I can't get a swing on the end of it to pound it straight out, I can't spin it with a box end and I can't get an impact or a cheater bar in play due to the shock tower. I can't get a cold chisel underneath it, you can see where I've been trying, and the flange that the cam rotates against keeps me from putting a sawzall on it. I know you guys know tricks I don't know, somebody tell me one because I'm fresh out.
 

bryson

RME Resident Ninja
Supporting Member
Location
West Jordan
Alright. Give me $100 and donate what you feel is reasonable to BRC min $50 and the slide is yours.

View attachment 171554
View attachment 171555
View attachment 171556

Been beating on this bish for about three days now, alternating between heat and soaking in oil, and my butt is well and truly kicked. I can't get a swing on the end of it to pound it straight out, I can't spin it with a box end and I can't get an impact or a cheater bar in play due to the shock tower. I can't get a cold chisel underneath it, you can see where I've been trying, and the flange that the cam rotates against keeps me from putting a sawzall on it. I know you guys know tricks I don't know, somebody tell me one because I'm fresh out.
Are you replacing the upper control arm? If so, take the sawzall to the bushing sleeve and take it out in pieces that way. The chances of that coming out otherwise are slim to none. Those steel sleeves seize to the bolt and it's game over.
 

Kevin B.

Not often wrong. Never quite right.
Moderator
Location
Stinkwater
Are you replacing the upper control arm? If so, take the sawzall to the bushing sleeve and take it out in pieces that way. The chances of that coming out otherwise are slim to none. Those steel sleeves seize to the bolt and it's game over.
Yeah, I just managed to get a big enough lever on it and spin the bolt, and it's definitely seized to the inside collar of the bushing. Sawzall it is.
 
Top