Search results

I'm looking to find a steel 8inch diameter pipe cap so I can cut it in half and weld to the front of my zuk diff for a pumpkin cap...went to lowes today and they had never heard of a steel 8" pipe cap before...I'm seeing guys on the net doing this, but they are all out of state...anyone that has...

Yeah, my welder can take up to a 10lb spool...sounds like that is the way to go if I opt for flux core..the $56 for the gas.. was that on a leased cylinder or a cylinder exchange? or was that just for gas only?

Sounds like the main issue with flux core is the quality of wire then....It may be that my 110 does 1/4" so easily with flux core because it burns hotter...however the 110 does need to pull off a 40amp circuit on max power or a 30amp and 2nd to max, which may also account for how it is going...

I have no probs doing any fab with my 110...it penetrates 1/4" just fine, all the way through....and with me welding on a samurai, about the biggest i have to weld is 3/16", which it penetrates without a prolem on its 2nd highest power setting...I was also looking at going gas for the spatter...

we have a 110 130amp mig..we are looking for an argon/co2 mix like 75/25 or whatever....we just need a small cylinder maybe like a 18 inch tall one or whatever...something that will cover a few hours of welding is all...looking for the cylinder and gas fillup...I want to use gas instead of flux...

I love my lockright in the rear of my sammy...I have the detriot ez locker up front..almost the same, but slightly different pin arngmnt...I have no clue how to set up a locker or how differentials work(i can rebuild everything but them for some damn reason)anyway, my lockright in my chev...

my arms are very small in diameter(as spence can atest to)so, i want to go hydro assisted....I dont know what this jd2 is, but if it was one of them i saw, this bender would match in base price, however this bender comes with hydro assist AND 1 die for that price, where if I remember correctly...

Hey, I want to know what you guys think of this tubing bender that I am considering buying....looking at other benders on the net, it seems to have a good design and have an excellent pricetag attached to it. Anyway, let me know what you guys think http://209.238.153.119/hydbender.html...

Thanks for the heads up on what is open and what is not, Kurt. I appreciate it. -Doug

I was wondering if it is legal to camp at forest lake or not...dont want to get chewed out for being somewhere that i wasnt supposed to be with a fire etc....BTW, I went up AF canyon last week and I asked them if there were any trail closures. I was advised that the only trails and areas...

The pregnant rollerskate does need a SAS...however, we measured that rock and it was a 30" tall rock....I did have all 4 tires on the ground until i got outta the truck. As soon as I got out, the front driverside spring decided it was gonna decompress and lift everything else up with it :eek...

is a flop fest where we all grab jeff by the arms and leggs and toss him into the lake in bellyflop fashion? Because, if it is, include me in the flop fest next time!!!!!! Saturday was great, for once we didnt break a rig! tried to kill the samurai and heated up the clutch really good. Too bad...

Yeah, whats up with all these land cruiser people anyway? and how come they are all behave like self rightous jerks around me and anyone else i see them around?(with the exception to tigerstripe40 and matt at RRO)? Tigerstripe, didnt you drop your wasatch cruisers membership and tear all their...

How hard on the moab scale would you rate AF canyon where you guys are going? My wife is going with our sammy, which has stock suspension and tires and I wanna make sure she has the skill to get it through....if not, she might need to take our other car which has some lift on it and a bit bigger...

its a Hitachi carb....I just got my sammy vouchered because i had spent over $200 on it(for new carb purchase)and it had reduced total emmisions(by only 1%)....When i got it vouchered I had to go to some funny enviromental air quality thingy or something like that and show them the car to prove...

retard the timing???Hmmmm, i thought you wanted to advance the timing with an isky cam...i have mine at the stock 10degrees btdc...well, i hope i have spent enough money on the carb that with the whopping 1% reduction they will just voucher the thing...if not, does nayone know of anywhere that...

I would say around 169,000 miles(hard to tell with a sammy since it reads as xx,xxx.x on the odo, so you dont know if it is under 100, over 100 or even over 200,000....everything was put to factory spec on the top half of the engine when I installed the isky racing cam....I had a new cat put in...

k- guys, I need some creative thinking here...my sammy refuses to pass emmisions..i have a K&N intake, thorley header&isky racing cam.....my stock carb passed on everything except CO's, of which it was 3X over the limit at 7 point somehting...so I went and bought a reman carb from FC (who I...

great pics....what size tires and how much clearance are you running to get over cliffhanger?

hmmm, that really sucks. I was just under the assumption that they were making the route more clear since there were several ways of doing things before...I figured the white spray paint, at most, was put there by redrock wheelers for easter jeep safari to keep everyone in a smooth straight...