Search results

cool thanks.

wow that is quite a bit more than i expected to be down there. do you know about how difficult these trails are, or what type of terrain they are?

perfect. I'll try removing the relay and see what that does for the abs. as for the brake light, my ebrakes are still disconnected cause the axle i got had cut cables, so i'm guessing that's why that light is still on. i'll put new cables in and see if that goes away.

Does anyone know if there are jeep trails in the Palisades (Gunnison) area?

I have a 2000 XJ that I swapped the Dana 35 for a 8.25. The 35 had abs and the 8.25 does not. I unplugged the wiring for the abs (two separate clips) and the new axle did not have anything to replace it with. So how do I get the e-brake and ABS light to turn off?

So I bought an XJ recently and it had about a 4.5" lift on it. I put a long arm kit and a 2" coil spacer in the front. I was going to do a shackle lift but it was already done. I noticed the rear leaf pack has hardly any arch in them, and am not sure if they are after market or not. I was...

I need a carrier for my HP Dana 30, I'm getting ready to install some 4.56 gears does anyone have a spare carrier?

I need a keyless entry remote key fob for a 2000 Cherokee sport 4 door. Dealer wants way too much.

I just bought a 2000 xj and was replaced the two oxygen sensors but I still get a check engine light. Hooked up the scanner and it says Circuit High Voltage bank 1 sensors 1&2. Any idea's what that means or how to fix that? I'm told it's cause it's running too lean.

so how much you want for that 44 ;)

Pm sent

Fred how much? What year ?

Wanting a HP 30 for a Cherokee, preferably a 3.73gear ratio.

do you still have these? are they the five spoke looking things? got a pic?

do you have a complete high pinion dana 30 axle?

still got it? would the sye and drive shaft work for my cherokee that has a 5.5 inch lift?

high or low pinion 30?

dusty, PM'ed. I see OX also has an electric upgrade too. hmmm, lots of options.

that's what i was thinking, but does anyone make one for a super 35, i believe it's a 30 spline?

I'm wanting to get a new locker for my dana super 35. I'm wanting to go with an "optional " locker but keep hearing arb is way over rated. Is there any other options for a super35?