Ford Brian's bronco 2 gets wontons and dddd

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
Austin added smore lights to the front and wired in the stereo and lighted flag mount. received_196984334786244.jpeg

I installed a radiator over flow, mounted the computer, and fabbed and installed a hood prop. Note the custom drill holder?. I aired up the little 2.0 air shocks to the maximum recommended psi of 500 pounds, suprisingly. It sits a little raked out. They usually settle a bit so we will see. The only testing it got was around the block a few times to make sure the transmission worked and now its getting loaded on the trailer. Guess thata no different than the other years. Hammers bound in the am. ?

20200201_170227.jpg20200201_205927.jpg20200201_210208.jpg20200201_210216.jpg
 

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
It got a upper balljoint eliminator kit installed on the front 60. One side was totally shot. He also got a set of Krawler for it which Austin installed for him. We scabbed some new rear shackle mounts on it and made some new shackles as the factory ones were completely smashed and tacoed over.

Hes got most the parts to link the rear which we may do this month if i get time



127116332_10164612362440473_4097731434963112970_n.jpg127018609_10164631399140473_5448328950748216366_n.jpg129559606_10164667266425473_3823970786730775899_o.jpg130578836_3547716111983320_8846591428121720377_o.jpg130321464_3547715345316730_6628023169894537440_o.jpg130304611_3547714891983442_4013267606558605513_n.jpg
 

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
Bronco is getting some love. Brian smoked the gears in the front end. He sploded a stub shaft at, a rear 14b shaft, and a leaf spring all at the same time while at koh lol. He fixed all that then broke another 14b shaft and then the gears since we've been back. We are going to link the rear out finally with some trailing arms and queen shocks.


20210306_204032.jpg20210306_204026.jpg20210306_204051.jpg20210306_204041.jpg
 
Top