- Location
- Richfield, UT.
Zing!
General Tech Cory's single seat selfish buggy
- Thread starter YROC FAB.
- Start date
Zing!
_Auzzy_
Web Wheeling Extraordinaire
- Location
- Richfield Utah
soooo is it done, started the new one, etc etc?
- Location
- Richfield, UT.
dump
- Location
- Richfield, UT.
dump
- Location
- Richfield, UT.
Bling bling
This happened today:-\. I r sad. I tacoed my boom moving heavy things for YJ_Auzzy.
This happened today:-\. I r sad. I tacoed my boom moving heavy things for YJ_Auzzy.
_Auzzy_
Web Wheeling Extraordinaire
- Location
- Richfield Utah
we'll order new pins for the bender and we will make one from 1/4" dom or throw some cross bracing in the next one
_Auzzy_
Web Wheeling Extraordinaire
- Location
- Richfield Utah
that crown bottle is classy AF
and alex it was liftng something big n heavy and expensive.
and alex it was liftng something big n heavy and expensive.
- Location
- Richfield, UT.
Same. I want to weigh them and your unmolested ones.
Yes solid with fourwheelsupply matching keyed arms.
Austins truggy cab. I yanked the 454 with the th400 bolted to it with ease. I lifted the cab with it and was backing out of the drive way and when i was turning my front tire went up a slight slop in the drive way shifting the weight tacoing it over. It was fun getting the damn thing on a trailer when the guy showed up to get it. One pallet was sacrificed as our getto makeshift ramp. It was also fun getting the 454/400 back into the garage with out a boom in a dirt driveway. BTW austin you didn't drain the motor oil or tranny. Jacks dirt floor garage is thrashed.
My tig welder is from the 1970's lol. I have yet to wire my garage to run it(it takes 100amps). I can tack weld 1/8 aluminum. Anymore and it will pop the breaker. I just tack and take it to work and weld out.
- Location
- Richfield, UT.
Nadda. Its holding my garage floor down right meow. The plasma table has taken most of my time and money also car shows, going to lake, wheeling my two seater buggy, and other summer activity take alot of my time. I did ship my harness out a few weeks ago and he shipped out on Wednesday so i should being seeing that this week. I will resume progress on it as soon as the harness is back.
- Location
- Richfield, UT.
He did the one on my Willys buggy and did a heck of a job. Good company.
- Location
- Richfield, UT.
Not quite yet. I got my harness back and started plugging it all in. Still need a fuel system. I have been busy with this> https://www.rme4x4.com/showthread.php?111146-Cory-builds-a-cnc-plasma-table as well as many other random projects and odd ball jobs that run thru my shop, 50hr work weeks,Wheeling my 2 seat buggy, and all the damn summer activity's you could think of. Going river rafting this next weekend.
"Progress Pics"
Velcro holds the computer in place. I will install some foam in the aluminum cover to hold it in tight.
One full two car garage.
Damn, you are one very talented individual. Thanks for holding my hand with a link. I never go to CC. Well, I'm going to go booger up some more roll cage welds and pretend like I can bend tube. Not sure I could wheel my junk next to the single seater............If either of them ever get done! :littleblueguyflippingyouoff:
- Location
- Richfield, UT.
Thank you sir. Your tube skills will evolve quickly. I think its the easiest part of building these infernal machines and you have done well in all the other areas. Make me proud.They will get done in time and im sure yours can hang with the single seater. KOH17?