• RME Gear & Apparel

Dana 44 front and 9in rear Built

E

evandanner

Member
Dana 44 front

4.88 gears with ARB locker and warn hubs, full cromo

Rear 9in has detroit locker with 4.88 gears, full cromo

$1100 for the set. The 9in has been narrowed to match the dana 44. This would go prefect for someone who does not want to be full width.

Evan
(970)404-1716
 
Last edited:
E

evandanner

Member
They are not full with. Im not sure how wide they are exaclty. Ill measure that up asap. They are not at my house. They are in a shop the next town over. The 44 and 9 are both 5 on 5.5 lug pattern. The 44 is stock with and the 9 has been narrowed by about an inch on each side. The 44 is a low pinion. Im heading out to utah this weekend just south of salt lake if anyone is interest ill bring them along. Make an offer.

Evan
 
E

evandanner

Member
Passenger drop front. The t case was a dana 300.
They are the same width and would work great is someone wants to upgrade but no go full width.
 
E

evandanner

Member
Im pulling them out of a CJ7 but they were put under that by the previous owner. The 9 in looks like it came out of a bronco. Stil;l trying to match the Dana 44.
 
You must log in or register to reply here.
Top