Exhaust shop ????
- Thread starter mattvw65
- Start date
Brett
Meat-Hippy
- Location
- Salt Lake City Utah
Try the Master Muffler over by Fashion Place mall. Jeff Beach (Beaches's Offroad) works there now.
James K
NO, I'm always like this
- Location
- Taylorsville, Ut
cheap and quality don't really go together.
muffler around 35 to 55 low end.
plus labor and other materials
plus a little profit.
it adds up
muffler around 35 to 55 low end.
plus labor and other materials
plus a little profit.
it adds up
James K
NO, I'm always like this
- Location
- Taylorsville, Ut
agreed
bb88
New Title
- Location
- Clinton, Utah
Try Big-O on Antelope (in front of Lowe's)
Klif01
Do I bother you?
- Location
- Denver, CO
I will make an exhaust for you, buy the muffeler you want and like 10' of tube you want and I will make it work.
Milner
formerly "rckcrlr"
- Location
- Hiding behind a camera
Try AllTerain Auto across the street from Mepco. He did both B's and mine. Very good work for a reasonable price. Tell him we sent you.
Marc
Marc
shmoesmith
Registered User
I dont know how all terrain auto is with exhaust, but they did very good work with my tracker when I needed my IFS adjusted for camber and toe due to the lift on it puting the control arms at all funky angles.....good work and good price.
Brett
Meat-Hippy
- Location
- Salt Lake City Utah
Yep, they do good work. I forgot that they did that since we just primarily use them for alignments! Oops
Brad Yates
airwalks are cool
- Location
- Provo
will all terrain auto fuss if i want my exhaust bent up and out the rear fenderwell? anyone have a ph#... all i gots up here is the park city phone book.
- Location
- Sandy, Ut
Anthoer good one is Kents Muffler in Draper, approx 700 west and 12300 south. He has done a couple of my rigs, just tell him exactly how you want and he will hook you up.
Milner
formerly "rckcrlr"
- Location
- Hiding behind a camera
All Terrain 685-0197
Klif01
Do I bother you?
- Location
- Denver, CO
Isn't that like at the bottom of the hill going into provo across from D.I.? If not the place I am thinking of is my favorite. Some retired guy that opened a business and runs it by himself. He also did bending for my sliders and bumper.
tweakeyjeep
Soccer Mom
- Location
- Sandy
I got a custom set up exhaust for a good price on my YJ... I have from the catalytic converter back is 2.5 inches. I have a free flowing Magnaflow Muffler. It's increases the sound so now I can hear my car when it is idleing, but it isn't extremely loud... My tires are louder than exhaust under normal driving conditions. I got it done at Draper Muffler and Brake on 12300 South and 700 East, it is just north of the 7-11 which went out of business... They did it exactly how I wanted it and gave me advice and threw in a pretty little chrome tip for free! They bent the exhaust up out of the way of the rear axle so I don't bend it... Happend before.
I paid $230 for mine.
If you want it from headers all the way back... It's gonna be loud, my bro has the same setup as me, only 2.5" and headers and his is way loud. It's not the muffler that makes most of the sound it's the size of the pipe in diameter and how long it is... Muffler just makes a different tone. His setup was quite a bit more expensive though...
I paid $230 for mine.
If you want it from headers all the way back... It's gonna be loud, my bro has the same setup as me, only 2.5" and headers and his is way loud. It's not the muffler that makes most of the sound it's the size of the pipe in diameter and how long it is... Muffler just makes a different tone. His setup was quite a bit more expensive though...