I.H Scout traveler

Broncoman

Registered User
Location
MOAB,Utah
I just picked up an old scout traveler. I need to know if any one knows of a place that any type of performance part can be obtained .. ie. 4bbl intke manifold , cams , headers .... it uses a mopar torqflite auto and d44s haven't checked out the t-case yet but I think it's either a 20 or 300 ... any help would be appreciated ...thanx
 

Broncoman

Registered User
Location
MOAB,Utah
345 inter. manifld

thats what I'm looking for .... if its not too much .. how much do u want ? is it from a stock motor or an after market ??
 

Brad J

Registered User
Location
Woods Cross, UT
Broncoman said:
is it from a stock motor or an after market ??

As of right now there is no aftermarket intake manifold that I am aware of but there is an aluminum 4 barrel intake manifold in the works for the 345 & 392 by a Vendor in CA. Headers and FI are popular to get but I haven't tried either yet. I am very jealous, I've been looking for a Traveler/ Terra pickup to make a nice family cruiser for 5+ years. One w/ a diesel would be awesome. You can get almost everything that you need from SSS (super Scout Specialist) 937-525-0000
http://members.aol.com/suprscout

Also the Binder bulletin has everything you'd want to know about Binder's

http://www.binderbulletin.org/vendors/vendlist.htm

Good luck, Brad J
 

Brad J

Registered User
Location
Woods Cross, UT
Broncoman said:
haven't checked out the t-case yet but I think it's either a 20 or 300 ... any help would be appreciated ...thanx

If its an '80 w/ square headlights then there is a very good possibility it has a D300. The D20 will have the speedo cable on the drivers side the D300 will be on the Passenger side.

HTH
-Brad J
 

JIM

85cj7
Supporting Member
Location
ogden ut
I parted out a 1980 traveler 2 years ago and it had a model 20 t-case.
I still have a complete 345 with 4 barrel and trans.
 

Brad J

Registered User
Location
Woods Cross, UT
bubba said:
I still have a complete 345 with 4 barrel and trans.

Very interested in both if the tranny is a T19 wide. I have found a couple but they get crushed before I can get them. :mad:

Thanks, Brad J
 
Last edited:
Top