LS1 fuel fittings

CSR

Active Member
Location
Mapleton
I need to know what parts to get to connect between an LS1 fuel filter/regulator and the LS1 fuel rail. I obviously can't use a stock corvette fuel line because of routing and length. Also (embarrassing question), which of the two connections on the rear of the filter/regulator is the feed line, the large one or the small one?

Anyway, just wondering what you guys who have dealt with LS engines have used to connect everything together.

Oh, happy Thanksgiving, everyone!
 

UNSTUCK

But stuck more often.
Most of the hose/fitting companies make the quick disconect fitting for the fuel rail. I've used Russell a few times and will continue to when I have these projects. The larger fuel line (3/8") is supply and the smaller (5/16") is return. I'm not sure about the fuel filter as I have never used a stock LS filter, but I would imagine they are also the same QD's.
Here is a link to Russell's page. About 3/4 of the way down is the fittings you will need.
http://russellperformance.com/mc/adapt_fit/fuel.shtml

This is the picture of the ones you want http://russellperformance.com/mc/adapt_fit/img/640850_lg.jpg
 

waynehartwig

www.jeeperman.com
Location
Mead, WA
Most of the hose/fitting companies make the quick disconect fitting for the fuel rail. I've used Russell a few times and will continue to when I have these projects. The larger fuel line (3/8") is supply and the smaller (5/16") is return. I'm not sure about the fuel filter as I have never used a stock LS filter, but I would imagine they are also the same QD's.
Here is a link to Russell's page. About 3/4 of the way down is the fittings you will need.
http://russellperformance.com/mc/adapt_fit/fuel.shtml

This is the picture of the ones you want http://russellperformance.com/mc/adapt_fit/img/640850_lg.jpg

Exactly. I bought mine from Summit Racing.
 

CSR

Active Member
Location
Mapleton
The part shown on the Russell website has several part numbers next to it. Which part number is it? I didn't see it listed on Summit.
 

BEACH

Casey Beach Racing
Supporting Member
The guys at Wide Open Design have an awesome article on pirate 4x4 about how to plumb your car right, correct parts to use and so on.. Awesome guys and very cool of them to put it together! Has part numbers, pics and diagrams! Very very cool
 

CSR

Active Member
Location
Mapleton
The guys at Wide Open Design have an awesome article on pirate 4x4 about how to plumb your car right, correct parts to use and so on.. Awesome guys and very cool of them to put it together! Has part numbers, pics and diagrams! Very very cool

Do you have a link to that?
 
Top