Need a couple parts turned on a lathe

[jsudar]

I need two pieces turned on a lathe. I'm updating an early 1990's bicycle frame building jig to build modern mountain bikes. I have the materials ready to go. I'm in Utah county. Closer is preferable, but I'll drive to SLC if need be. Not looking for a freebie, I'm just tired of dealing with machine shops that are so reluctant to do anything besides production work (which I totally understand.) I thought I'd post up here and see if anyone is willing to help me out. We can work out some sort of compensation.

The first one is a piece of 3/4" stainless rod about 12" long. I need both ends squared up and chamfered.

The second one is an aluminum spool piece. 2.5" long and 1" diameter. Nothing too technical. Dimensioned drawing is attached.

 

[zmotorsports]

I'm a little further north (closer to Ogden) but I would be willing to turn them if you could get them to me.

Mike

 

[WILDHAIR225]

I can do it. My shop is in Spanish fork, I can probably do it while you wait if my lathe is open. 385-205-0354

 

[jsudar]

I can do it. My shop is in Spanish fork, I can probably do it while you wait if my lathe is open. 385-205-0354

I texted and called a couple times, but got a message stating the phone number was not accepting calls. Is that number right?

 

[WILDHAIR225]

I'm sorry I put a 5 instead of an 8 Its 385-208-0354