Need Help With a 15 Minute TIG Job

[UNSTUCK]

I have two cracks in the wakeboard tower on my boat I need welded. The two cracks are exactly the same but on opposite sides of the tower. I can do all the prep work then bring the boat to you. I have started tig welding, but I need this to be strong and it has to look great. I'm not there yet. Each crack is at the base of the tower and goes about a third of the way around the aluminum tube. I'd like to have this done this week



If you are interested and have time one evening this week I could really use the help.
Thanks
Josh
8o1 918 9784

 

[BlueWolfFab]

I'd contact Rush Kane (@kanekid on Instagram) I don't have his number but he's downright one of the best TIG welders out there.

 

[Greg]

Talk to MikeGyver on here, he's damn good with a tig. - https://www.rme4x4.com/member.php?8979-MikeGyver - http://www.utahweld.com/

 

[UNSTUCK]

Talk to MikeGyver on here, he's damn good with a tig. - https://www.rme4x4.com/member.php?8979-MikeGyver - http://www.utahweld.com/

I was hoping he would see this and post up.

 

[RogueJeepr]

BlueWolf, dont you do a bit of welding too ?
I have something that needs a 1/2" weld done. Took a magnet to it and didn't stick, im thinking it's stainless OR other. Dont really want to jb weld it.


Sent from my H1611 using Tapatalk

 

[BlueWolfFab]

BlueWolf, dont you do a bit of welding too ?
I have something that needs a 1/2" weld done. Took a magnet to it and didn't stick, im thinking it's stainless OR other. Dont really want to jb weld it.


Sent from my H1611 using Tapatalk

I do but my TIG is down right now needing a new torch cable and I've been so slammed with construction work that I haven't gotten around to even messing with it yet. For reference it's been down since about July and I still haven't fixed it ha, so I don't see it being fixed until probably snow flies.

 

[UNSTUCK]

I kind of let this slip through the cracks. I did a mad dash to winterize the boat last night. At this point it can wait till spring. By then my aluminum TIG welding might be up to par and I'll do it myself.

 

[Cascadia]

I do but my TIG is down right now needing a new torch cable and I've been so slammed with construction work that I haven't gotten around to even messing with it yet. For reference it's been down since about July and I still haven't fixed it ha, so I don't see it being fixed until probably snow flies.

So that's why my sign remains unfinished.....