Toy transfer case ?

[hillbillysteve]

My T-case stopped shifting into 2wd , I still have 4lo, N, and 4hi. I installed marlin 4.7:1 gears last winter but all has worked fine until recently. If any one has any ideas , lets hear them . I'm confused.

 

[OREGON85]

I had the exact opposite happen. Before the marlin gears it was really hard to get it into 2wd, now it shifts really smooth.

 

[rollover]

Take your top shifter out and realign it up. The shifter will from time to time slip out where the ball end fits in the transfer shift rods. 5-!0 min fix.

 

[hillbillysteve]

I took the shifter out yesterday and I couldn't move the rail even with a pry bar!!! I don't know if its some problem with the rail , the shift fork or maybe the roll pin that holds the fork on the rail. I would think that if something were interfering with the movement that there would be some grinding noise or something? I think I'll just keep on truckin' until winter ,I hardly use 2wd anyway.

 

[193kyle]

Mine shifts out of 4wd alot easier in reverse. Have you tried that? Did you unlock the front hubs so there is no pressure on the front output?

 

[193kyle]

Do you have duals or just a single case?

 

[hillbillysteve]

single case , never tried to unlock hubs . I have not had a problem before so I didn't think to try that. I'll see what happens.

 

[hillbillysteve]

Unlocked hubs , put in reverse and shifted into 2wd smooth as butter!!!! Thanks , I have never had to un lock hubs or back up before. I'm usally in 4wd , but sometimes I use 2wd but, very rarely.

 

[193kyle]

Glad I could help!

 

[pELYgroso]

that's usually how I get mine out of 4 also.