That helped, stuck it in reverse and attempted to move with one wheel in the air and one on the ground and now it spins free and the arm will go back and forth.
Next question I bought a 10 pin elocker switch from Low Range, I'm using this diagram from their site.
I bought a 6 strand trailer wire to get from the harness to the switch and have done the following:
elocker harness - 6 strand
Blue/yellow - Blue
Green/Red - Red
Green/Yellow - Yellow
Green - Green
Green/black - black
2 -white/black - brown --> ground
So my wire would be like this:
pics
The pictures aren't clear because I used a red wire for the power going into 8,3, and 4 so don't confuse the red wire in the 6 strand with these red wires.
Right now it doesn't appear to get power back to the locker, The Green and Green/red are the wires coming out of 2 and 3 on the locker harness. When I put a couple lead wires from 2 and 3 where they plug into the locker harness to a light it doesn't light up while switching the switch.
- - - Updated - - -
Were you able to get your actuator motor to spin?
Yea I ended up with one from a wrecking yard, still wonder if I would have been better off getting one from you.