Search results

What kind of insert? My cheap carbide inserts i use didnt wanna scratch it

Thanks I guess? 😆

I decided it would be better to just replace the tubes then to cut and spice them to get them offset enough. The original tubes were only .250 thick and pretty rotten under the original spring perches. I then shaved the 14bolt ring gear down to 10.05" to see if it was worth doing. After 45...

Still beefy. Ima run them on my front axle. They are still massive compared to the kingpin stuff and i have throughly tested the limits on king pin strength. The 09 inner Cs are also weaker than the 05-08. 09 C on the left. 05-08 on the right

Pics of the 09' FoMoCo knuckles. Thinner around the ball joints, thinner where my 05-08 highsteer steer plates weld on, and the gigantic window around the lower balljoint. Chunk of 3/8 Ball joint eliminators Stacking them out. That was alot of welding. As much as id like to tig weld these it...

yes they are its too bad FoMoCo had to start making the knuckles in 09. They are quite a bit weaker.

Thank you sir. Ima try and tig weld everyting on this buggy this go around.

05 inner C> kingpin inner ci got all my hubs drilled to standard 8x6.5Made some grease zerk plates to replace the ABS sensor holes. You can pump grease into the unit bearings here. I got my steering parts cut.My atlas showed up. I gonna get the axles done before i start the chassis.I got some...

for the listed price?

Did mbryson take it for reals then? If not i call dibs. He had his chance.

I'm building myself a family rig similar to jaydens but better 😆 .5.3, Whipple, th400, atlas4.3, 14 bolts with 05 knuckles, 40 spline. @BeepBeep fabricated us a baby boy (I helped). i picked my axles up from the sandblaster yesterday.2005-2008 have stronger knuckles and inner cs. I have one 09...

Sold. stay tuned for the next chassis. Lmk if you interested in one. I also stock 1020 dom in 2x.095, 1.75x.120, 1.5x.120x and 4130 in 1.25x .095, 1x.083 and can get about any size dom realitivly quick down in Richfield.

Im after 2 14 bolt axles. They need to be newer ribbed housings and one needs to be a disc brake one. anyjuan? Bueller? lmk

Its coming. Im going to build me one and an extra one here in a month or two. Building axles now for my new buggy.

Thank you. Ive spent alot of time designing roll cages the last few years and wanted a buggy chassis that was just a little different than others. I want to keep improving them hence why this is #4. i will save every model i ever make with subtle changes in between.

Shes off the table and ready for a new home.

Ive developed a chassis tab kit for it now. Ive design the tube x members where the links would land so that i can use the same tab all around. I'll include these in with the listed price and will have them tacked on before i lift the chassis off the table.

I have the overloads on my 4 runner with the 63's and it rides way nice in the rear. I'd think it's similar weight with your 4door tayco. I wanted that extra 1/2" of lift they provide and figured I could just reach in there with a cutoff wheel if they were a problem. Pretty sure my 63's are a 3...

I guess i didnt put it out there but i am going to keep building buggy chassis. Its something i quite enjoy. I built this chassis so i could spend the time and do the necessary R&D to make them go more smoothy. Ive had a sxs roll cage buisness for the last 3 years that has prospered to the point...