Search results

A friend of mine is helping his son's sister in law sell off her deceased husbands tools and other stuff so she can move. I have been over three times and need to get others to buy this stuff so I won't buy any more. This guy was a MASSIVE hoarder and the amount of stuff is amazing. Many of the...

Sorry I don't have one unless you want to modify a chevy blazer one.

I need some swaybar links for my latest project. I was thinking something like the Currie ones. Anyone have a couple they want to sell ?

There are 5 rims (the spare has circles rather than Ds) $130. I'll need to dismount my new KM2s that are currently on them. Here is a picture of one of them that wasn't on my jeep, it still has dirt on it from our last trip.

My son has some very nice black spoke 15x8 6 lug rims

You can use the brake lines off of a full sized chevy van they are longer than the 4x4 ones and cheap at the junk yards.

OK I see what you meant, so I edited the original post. I see how the drawing works as long as the axle stays horizontal but does the argument hold if the axle is not horizontal (bump lifts one side or hole drops one side but not the other) ? It seems to me that in this case the horizontal...

X2

The reason for the full circles is to show how the arcs aren't the same when the two arcs don't come from a co-planar position in both x and y. The radius is the same but the path traveled is different. Over the limited range of motion of a real suspension the difference in the arcs is very...

In an attempt to understand the geometry of track bars for my latest project that uses high steer I decided to draw up some drawings to show the relationship between track bar and drag link lengths and geometry. I thought this may be an interesting topic for discussion. The first drawing shows...

$80 If you want to do the one you have you can send it to Parts Mike and they charge $55 to drill and tap but you have to pay shipping to get it there.

I have one that is already drilled and tapped.

We just got back from Moab, we rode several trails in the BarM and Sovereign areas. These are great trails if you haven't tried them. I just need to toughen up the back side, I was quite sore after the first day.

My son scored a Tera Flex rear disc kit at the Pull n Save and I am putting it on my Scrambler. I know that I need a new proportioning valve and have one from a ZJ. The front calipers are from a chevy truck. I need to find a master cylinder for a disc/disc vehicle since the one I have is for...

I have some large bearing spindles if you still need some.

I have some flat top knuckles, one is even drilled for high steer. Also have a high steer arm and an assortment of pitman arms.

I have too many coil springs laying around and need to clean up: stock XJ front coils $5 each stock TJ Rubicon unlimited spring sets $35 Like new 2 inch TJ rear springs like new $35 4 inch TJ front springs $35 I also have some other ones but need to measure them All in Salt Lake

SOLD

We have been out quite a bit, mostly Rockport, Currant Creek and Starvation. We have had plenty of fish to eat. Haven't made it to the Gorge but want to and I got sick just before our annual Fish Lake trip and had to skip it.

I have several 91-95 XJ with AW4. I just need to make sure they are complete.