Search results

Oh man. I have probably the 2nd best car cassette deck ever made after the Nakamichi 1200. I have a Harmon Kardon CH160 sitting in my basement storage. I know for a fact it worked when I removed it from my CJ to go CD in the mid 90s. It has sat in a box ever since. It is preamp only (a...

A big sub can sound just as punchy as a small one, and quality subs benefit from being bigger. You have a problem in the mid bass part of the spectrum probably above the crossover setting to your current sub. My home system measures flat to 10 hz and it does not sound bloated or boomy. A kick...

There is trailer parking at the end of Hells Revenge, and also trailer parking for the F & T trail off of sand flats road.

I would love to go. When you set a date let me know.

If he does take the carrier I have one I need to sell. Same price.

http://www.amazon.com/Pioneer-DEH-80PRS-Receiver-Crossover-Alignment/dp/B006Y44DAY If you do consider going with a regular car head unit instead of a marine one, do some research on this head unit. It is a bargain for anyone looking for real sound quality. You will not beat its sound for...

2 5/8 spacer to set link bracket length. 1 almost done. I need to cut new wider gussets for the center.

The Joints were ordered a month ago hopefully I don't have to wait as long as I did for the steering joints (4months) but they are worth the wait anyway. For links I have probably read and thought too much about it. Aluminum vs DOM vs chromoly. I decided on 4130 chromoly. The only issues I...

The first thing I want to get done is the suspension. One thing I knew is that I wanted to run large EMF joints. This caused the first annoyance of the project. Wide Open Design sets up their link brackets with 2 3/8" wide space and a 1" through hole. They would not work with me at all on...

A few pics of the front.

Hope fully I can hire you for a few things on this project. PM me your number and a good time to call I'd like to discuss it with you. Mine probably won't be done first. It is going to be very slow.

The axles have been complete for a while. A quick rundown. I milled off the bottom of the 14bolt, and turned down the ring gear. I cut slots in an old oven so the axle could slide in. The pumpkin was heated to 500 and I welded the plate on with nickel 55 rod. The axle was put back into the...

A month ago this showed up.

I bought my current CJ7 in 1989. I have been modifying and wheeling it ever since. It is very reliable (the thing just never breaks) and goes most places I want to take it, but for the last decade or more it has been at a big disadvantage when running with modern rock crawling buggys and built...

A good example of what I am talking about is the preamp in my main home system. It will operate in active or passive mode. In active mode it has gain and will output a higher voltage signal to the amplifiers. In passive mode it will output less. The fact is I have a hard time hearing any...

Lowering the gain of the amp does lower the noise floor (the noise that is there whether there is signal or not and when there is no signal is when the noise is noticed) Lets say the preamp in the head unit is noisy or the interconnects are picking up noise from the vehicle, turning the amp...

I will agree that a 4 volt preout (I am guessing you meant volt not amps) is preferable, and all head units that have any SQ aspirations (which these days are few and far between) will output 4 volts. When you say that a lower output signal is like taking a small picture and blowing it up...

I am. I will be alone.

Anyone going to be in Moab the 22nd through the 24th?

I have some new 7/8 X 3/4 I need to sell. Probably the same as the wrong ones.