Not sure why so many people on FB groups seem to think that resin printing can’t make useable parts.
3 parts I printed this weekend for my mill;
Bracket to hold a mister nozzle
Adapter to go from the sheetmetal coolant trough to 2” hose. The flood coolant drains out the back of the machine into this trough and the instructions have you hackjobbing the 2” hose onto the end of the trough but I figured I could do that cleaner.
Instructions:
My way:
And then the coolant drains into a 5 gallon bucket where it’s pumped back up to the nozzle. I printed a sieve with about 100,000 .75mm holes in it to filter out any chips before they make it into the bucket. I’ll empty this as needed as chips accumulate. The big holes at the top will allow it to overflow into the bucket if the small holes get clogged and can’t drain.