Early Fall Shop Clean Out!! Axles, t-cases, Ring&pinions, Lockers ETC!!

Ring And Pinions

so after many hours of sorting, with more to come, this is what I ended up with. will have prices up shortly:

RING AND PINIONS - $35-50 a set, $70 with carriers, $20 for carriers

DANA 30-

Available R&P's: TJ 4.88 on carrier, 3.73 on carrier, 2-3.55 on carriers, TJ-4.10, 2-3.55, 3.07 on carrier, 3.31, JK-3.21

Carriers: Low Ratios- 1 High ratios- 10

Lockers: 1 Lock-rite

DANA 35

Available R&P's: 3.55

Carriers: Low Ratios - 2 High Ratios - 1

Lockers: 1 Lockrite

DANA 44

Available R&P's: 3-JK Front 4.10s, 3-JK Rear 4.10s, 4.09, JK Rear 3.21

Carriers: Low Ratios - 0 High Ratios-3

Lockers: 1 TJ44 Detroit low ratio

DANA 50/60

Available Dana50 R&P: 2-3.73 on carrier

Available Dana60 R&P's: 2-3.54 reverse cut, 3.73, 3.73 on carrier, 2-4.10 reverse cut, 3.55 on carrier.

Cases: Low- 0 High-0

GM Axles

Available R&P's:
-8.0-3.73
-8.25- 3.42
-8.5- 3.42
-9.25- 3.73 x 2, 3.73 on carrier
-11.5- 3.42

Carriers: 1 high ratio for 8"

Lockers: 1 10.5"gov lock with broken center pin, 1 set of HO72 Spider gears

CHRYSLER

R&Ps: 0

Carriers: Low Ratios- 0 High Ratios-2

TOYOTA

Available R&P's: 2-4.38, 4.10 on carrier

Carriers: 0


FORD/STERLING

Available R&P:
-8.8- 3.73, 3.73 on limited slip carrier
-9.75- 0
-10.5- 3.73, 3.55

Carriers:
8.8-0
9.75- 1 high ratio
10.5- 1 limited slip high, 2 open high




 
Last edited:
So do you still have the Detroit Locker? When you say Low ratio do you mean lower gears like 4.88 or lower number like 3.55. I need one for a 4.88 gear set Should this work in a Cherokee Dana 44
 
You must log in or register to reply here.
Back
Top