Early Fall Shop Clean Out!! Axles, t-cases, Ring&pinions, Lockers ETC!!

_Auzzy_

Web Wheeling Extraordinaire
Location
Richfield Utah
As the title says, clearing out lotta random crud! basic idea of what we have till i get it all accounted for this sunday:

Axle Shafts! Dana 30s, 35s, 44s, AMC20s, and some other randoms!

Tcases! NP205, lotta dana 20's and 18s!, a np242,

Ring and Pinions: Lotta factory ratios! danas, sterlings, GMs, Toyotas, fords, we have alot of options!

Lockers: Dana 44 low ratio Detroit that is dang near new!! sterling limited slips, might have a couple dana traclocs have to double check!

transmissions, not exactly sure makes n models but i will get them tagged and listed soo

Axles: newer style 14 bolt- needs spiders, lots of old dana 30s front and rears, old jeep dana 44's front and rears, a yj dana 30 front, 2 tj dana 35's, ones just a housing.

Tires: Used and brand new take offs from power strokes and dirtymaxs! plus some jeep take offs, and a random set of new car tires on rims

Suspension: Lotta jeep leafs mostly YJ's, some CJ's we also get alot of superduty parts like trac bar brackets, coils, factory rancho shocks with most of them having less than 1000 miles on them

plus alot of other random stuff i will get listed on here with prices soon!

BUT if you would like to check and see what i might have in stock before i have the oppurtunity to list and sell it, hit us up at MIDSTATE JEEPARTS & 4WHEELDRIVE in richfield

phone is 435 893 eight eight one one

Hours are 9-6 Monday-Friday!




AXLE SHAFTS

Dana 44

Stub shafts- $35-40

Dual c clip 10" - 2
Single c clip 8 7/8" - 3, 1 has the ujoint cap welded to it, crapy weld, you want it its yours

Complete shafts-$65-75
1 - 35 1/2" long with 10" dual clip stub
1- 19 1/8" long with 9 7/8" single clip stub
1- 19 1/8" long with 8" single clip stub

short side shafts- $45-50
15 3/4" - 1
14 3/4" - 1
15 7/8" - 1
16 3/4" - 1
17" - 1

long side shafts-$65-70
35 1/4" - 1

Rear Dana 44 shafts-$50
Scout shafts:
2 @ 30" long
2 @ 28 3/8" long

Dana 30

Complete shafts-$75
1 complete TJ Long side

Long shafts: $45-50
1 @ 32 1/2" long

Short side shafts-$40-50
1 YJ outter half shaft
2 @ 14 1/4"
1 @ 15 7/8"

Old Coarse spline full shafts-$50-75
didnt count them quite a few long and shorts, message or quote for info

AMC 20 - $35-45

4 fine spline shafts- didnt measure
2 coarse spline

DANA 35 $45-50

Have a bunch fom XJ's, YJ's, TJ's, give me a model and yea and i probably

1 set stands out, its a pair of alloy gear shafts for a TJ, asking $130 obo for the pair


RING AND PINIONS - $35-50 a set, $70 with carriers, $20 for carriers


DANA 30-

Available R&P's: TJ 4.88 on carrier, 3.73 on carrier, 2-TJ 3.55 on carriers, TJ-4.10, 2-3.55 Reverse, 3.07 on carrier, 3.31, JK-3.21

Carriers: Low Ratios- 1 High ratios- 10

Lockers: 1 Lock-rite

DANA 35

Available R&P's: 3.55

Carriers: Low Ratios - 2 High Ratios - 1

Lockers: 1 Lockrite

DANA 44

Available R&P's: 3-JK Front 4.10s, 3-JK Rear 4.10s, 4.09, JK Rear 3.21

Carriers: Low Ratios - 0 High Ratios-3

Lockers: 1 TJ44 Detroit low ratio


DANA 50/60

Available Dana50 R&P: 2-3.73 on carrier

Available Dana60 R&P's: 2-3.54 reverse cut, 3.73, 3.73 on carrier, 2-4.10 reverse cut, 3.55 on carrier.

Cases: Low- 0 High-0


GM Axles

Available R&P's:
-8.0-3.73
-8.25- 3.42
-8.5- 3.42
-9.25- 3.73 x 2, 3.73 on carrier
-11.5- 3.42

Carriers: 1 high ratio for 8"

Lockers: 1 10.5"gov lock with broken center pin, 1 set of HO72 Spider gears

CHRYSLER

R&Ps: 0

Carriers: Low Ratios- 0 High Ratios-2


TOYOTA

Available R&P's: 2-4.38, 4.10 on carrier

Carriers: 0



FORD/STERLING

Available R&P:
-8.8- 3.73, 3.73 on limited slip carrier
-9.75- 0
-10.5- 3.73, 3.55

Carriers:
8.8-0
9.75- 1 high ratio
10.5- 1 limited slip high, 2 open high


20140908_175559.jpg20140908_180024.jpg20140908_175626.jpg20140908_175633.jpg20140908_175635.jpg20140908_175803.jpg20140908_175824.jpg20140908_175924.jpg20140908_175944.jpg20140908_180015.jpg
 
Last edited:

_Auzzy_

Web Wheeling Extraordinaire
Location
Richfield Utah
The detroit is out of a TJ rear D44, we were hoping to get around $450-425 for it but i can do a RME deal for $375 I also have a D30 and 35 Lock rite set for YJ axles.
 

_Auzzy_

Web Wheeling Extraordinaire
Location
Richfield Utah
Allright, PM's sent out, besides to james ^, sory but we do not have any 14 bolt shafts to my current knowledge, but once i dig through my piles i will have a better idea if i do or not.
 

_Auzzy_

Web Wheeling Extraordinaire
Location
Richfield Utah
If anyone wants something i might have, call me at the shop, 435 893 88-one-one or on my cell at 435 979-05-five-one Ask for Austin
 

_Auzzy_

Web Wheeling Extraordinaire
Location
Richfield Utah
was able to run through our axle shafts this morning and this is the list i got.

Dana 44 Stub shafts- $35-40
Dual c clip 10" - 2
Single c clip 8 7/8" - 1

Complete shafts-$65-75
1 - 35 1/2" long with 10" dual clip stub
1- 19 1/8" long with 9 7/8" single clip stub
1- 19 1/8" long with 8" single clip stub

short side shafts- $45-50
15 3/4" - 1
14 3/4" - 1
15 7/8" - 1
16 3/4" - 1
17" - 1

long side shafts-$65-70
35 1/4" - 1

Rear Dana 44 shafts-$50
Scout shafts:
2 @ 30" long
2 @ 28 3/8" long

Dana 30

Complete shafts-$75
1 complete TJ Long side

Long shafts: $45-50
1 @ 32 1/2" long

Short side shafts-$40-50
1 YJ outter half shaft
2 @ 14 1/4"
1 @ 15 7/8"

Old Coarse spline full shafts-$50-75
didnt count them quite a few long and shorts, message or quote for info

AMC 20 - $35-45

4 fine spline shafts- didnt measure
2 coarse spline

DANA 35 $45-50

Have a bunch fom XJ's, YJ's, TJ's, give me a model and yea and i probably

1 set stands out, its a pair of alloy gear shafts for a tj, asking $130 obo for the pair
 
Top