_Auzzy_
Web Wheeling Extraordinaire
- Location
- Richfield Utah
As the title says, clearing out lotta random crud! basic idea of what we have till i get it all accounted for this sunday:
Axle Shafts! Dana 30s, 35s, 44s, AMC20s, and some other randoms!
Tcases! NP205, lotta dana 20's and 18s!, a np242,
Ring and Pinions: Lotta factory ratios! danas, sterlings, GMs, Toyotas, fords, we have alot of options!
Lockers: Dana 44 low ratio Detroit that is dang near new!! sterling limited slips, might have a couple dana traclocs have to double check!
transmissions, not exactly sure makes n models but i will get them tagged and listed soo
Axles: newer style 14 bolt- needs spiders, lots of old dana 30s front and rears, old jeep dana 44's front and rears, a yj dana 30 front, 2 tj dana 35's, ones just a housing.
Tires: Used and brand new take offs from power strokes and dirtymaxs! plus some jeep take offs, and a random set of new car tires on rims
Suspension: Lotta jeep leafs mostly YJ's, some CJ's we also get alot of superduty parts like trac bar brackets, coils, factory rancho shocks with most of them having less than 1000 miles on them
plus alot of other random stuff i will get listed on here with prices soon!
BUT if you would like to check and see what i might have in stock before i have the oppurtunity to list and sell it, hit us up at MIDSTATE JEEPARTS & 4WHEELDRIVE in richfield
phone is 435 893 eight eight one one
Hours are 9-6 Monday-Friday!
AXLE SHAFTS
Dana 44
Stub shafts- $35-40
Dual c clip 10" - 2
Single c clip 8 7/8" - 3, 1 has the ujoint cap welded to it, crapy weld, you want it its yours
Complete shafts-$65-75
1 - 35 1/2" long with 10" dual clip stub
1- 19 1/8" long with 9 7/8" single clip stub
1- 19 1/8" long with 8" single clip stub
short side shafts- $45-50
15 3/4" - 1
14 3/4" - 1
15 7/8" - 1
16 3/4" - 1
17" - 1
long side shafts-$65-70
35 1/4" - 1
Rear Dana 44 shafts-$50
Scout shafts:
2 @ 30" long
2 @ 28 3/8" long
Dana 30
Complete shafts-$75
1 complete TJ Long side
Long shafts: $45-50
1 @ 32 1/2" long
Short side shafts-$40-50
1 YJ outter half shaft
2 @ 14 1/4"
1 @ 15 7/8"
Old Coarse spline full shafts-$50-75
didnt count them quite a few long and shorts, message or quote for info
AMC 20 - $35-45
4 fine spline shafts- didnt measure
2 coarse spline
DANA 35 $45-50
Have a bunch fom XJ's, YJ's, TJ's, give me a model and yea and i probably
1 set stands out, its a pair of alloy gear shafts for a TJ, asking $130 obo for the pair
RING AND PINIONS - $35-50 a set, $70 with carriers, $20 for carriers
DANA 30-
Available R&P's: TJ 4.88 on carrier, 3.73 on carrier, 2-TJ 3.55 on carriers, TJ-4.10, 2-3.55 Reverse, 3.07 on carrier, 3.31, JK-3.21
Carriers: Low Ratios- 1 High ratios- 10
Lockers: 1 Lock-rite
DANA 35
Available R&P's: 3.55
Carriers: Low Ratios - 2 High Ratios - 1
Lockers: 1 Lockrite
DANA 44
Available R&P's: 3-JK Front 4.10s, 3-JK Rear 4.10s, 4.09, JK Rear 3.21
Carriers: Low Ratios - 0 High Ratios-3
Lockers: 1 TJ44 Detroit low ratio
DANA 50/60
Available Dana50 R&P: 2-3.73 on carrier
Available Dana60 R&P's: 2-3.54 reverse cut, 3.73, 3.73 on carrier, 2-4.10 reverse cut, 3.55 on carrier.
Cases: Low- 0 High-0
GM Axles
Available R&P's:
-8.0-3.73
-8.25- 3.42
-8.5- 3.42
-9.25- 3.73 x 2, 3.73 on carrier
-11.5- 3.42
Carriers: 1 high ratio for 8"
Lockers: 1 10.5"gov lock with broken center pin, 1 set of HO72 Spider gears
CHRYSLER
R&Ps: 0
Carriers: Low Ratios- 0 High Ratios-2
TOYOTA
Available R&P's: 2-4.38, 4.10 on carrier
Carriers: 0
FORD/STERLING
Available R&P:
-8.8- 3.73, 3.73 on limited slip carrier
-9.75- 0
-10.5- 3.73, 3.55
Carriers:
8.8-0
9.75- 1 high ratio
10.5- 1 limited slip high, 2 open high
Axle Shafts! Dana 30s, 35s, 44s, AMC20s, and some other randoms!
Tcases! NP205, lotta dana 20's and 18s!, a np242,
Ring and Pinions: Lotta factory ratios! danas, sterlings, GMs, Toyotas, fords, we have alot of options!
Lockers: Dana 44 low ratio Detroit that is dang near new!! sterling limited slips, might have a couple dana traclocs have to double check!
transmissions, not exactly sure makes n models but i will get them tagged and listed soo
Axles: newer style 14 bolt- needs spiders, lots of old dana 30s front and rears, old jeep dana 44's front and rears, a yj dana 30 front, 2 tj dana 35's, ones just a housing.
Tires: Used and brand new take offs from power strokes and dirtymaxs! plus some jeep take offs, and a random set of new car tires on rims
Suspension: Lotta jeep leafs mostly YJ's, some CJ's we also get alot of superduty parts like trac bar brackets, coils, factory rancho shocks with most of them having less than 1000 miles on them
plus alot of other random stuff i will get listed on here with prices soon!
BUT if you would like to check and see what i might have in stock before i have the oppurtunity to list and sell it, hit us up at MIDSTATE JEEPARTS & 4WHEELDRIVE in richfield
phone is 435 893 eight eight one one
Hours are 9-6 Monday-Friday!
AXLE SHAFTS
Dana 44
Stub shafts- $35-40
Dual c clip 10" - 2
Single c clip 8 7/8" - 3, 1 has the ujoint cap welded to it, crapy weld, you want it its yours
Complete shafts-$65-75
1 - 35 1/2" long with 10" dual clip stub
1- 19 1/8" long with 9 7/8" single clip stub
1- 19 1/8" long with 8" single clip stub
short side shafts- $45-50
15 3/4" - 1
14 3/4" - 1
15 7/8" - 1
16 3/4" - 1
17" - 1
long side shafts-$65-70
35 1/4" - 1
Rear Dana 44 shafts-$50
Scout shafts:
2 @ 30" long
2 @ 28 3/8" long
Dana 30
Complete shafts-$75
1 complete TJ Long side
Long shafts: $45-50
1 @ 32 1/2" long
Short side shafts-$40-50
1 YJ outter half shaft
2 @ 14 1/4"
1 @ 15 7/8"
Old Coarse spline full shafts-$50-75
didnt count them quite a few long and shorts, message or quote for info
AMC 20 - $35-45
4 fine spline shafts- didnt measure
2 coarse spline
DANA 35 $45-50
Have a bunch fom XJ's, YJ's, TJ's, give me a model and yea and i probably
1 set stands out, its a pair of alloy gear shafts for a TJ, asking $130 obo for the pair
RING AND PINIONS - $35-50 a set, $70 with carriers, $20 for carriers
DANA 30-
Available R&P's: TJ 4.88 on carrier, 3.73 on carrier, 2-TJ 3.55 on carriers, TJ-4.10, 2-3.55 Reverse, 3.07 on carrier, 3.31, JK-3.21
Carriers: Low Ratios- 1 High ratios- 10
Lockers: 1 Lock-rite
DANA 35
Available R&P's: 3.55
Carriers: Low Ratios - 2 High Ratios - 1
Lockers: 1 Lockrite
DANA 44
Available R&P's: 3-JK Front 4.10s, 3-JK Rear 4.10s, 4.09, JK Rear 3.21
Carriers: Low Ratios - 0 High Ratios-3
Lockers: 1 TJ44 Detroit low ratio
DANA 50/60
Available Dana50 R&P: 2-3.73 on carrier
Available Dana60 R&P's: 2-3.54 reverse cut, 3.73, 3.73 on carrier, 2-4.10 reverse cut, 3.55 on carrier.
Cases: Low- 0 High-0
GM Axles
Available R&P's:
-8.0-3.73
-8.25- 3.42
-8.5- 3.42
-9.25- 3.73 x 2, 3.73 on carrier
-11.5- 3.42
Carriers: 1 high ratio for 8"
Lockers: 1 10.5"gov lock with broken center pin, 1 set of HO72 Spider gears
CHRYSLER
R&Ps: 0
Carriers: Low Ratios- 0 High Ratios-2
TOYOTA
Available R&P's: 2-4.38, 4.10 on carrier
Carriers: 0
FORD/STERLING
Available R&P:
-8.8- 3.73, 3.73 on limited slip carrier
-9.75- 0
-10.5- 3.73, 3.55
Carriers:
8.8-0
9.75- 1 high ratio
10.5- 1 limited slip high, 2 open high
Last edited:
