project bronco script.

broncomitch

dont be a sheep in a jeep
Location
west jordan,UT
thanks brother!

not much going on this week.. hope to get the frame cleaned up saturday but I need to fix my truck and do some work on the wifes new car.

oh ya, I had to spend my doubler money to go toward that so i cant buy my doubler stuff till her jeep sell's...after the rear suspension all i have left is..
plumb in walbro pickup's and fuel cell.
doubler stuff.
drive shaft's and upgrade to 1350's in place of the 1310's.
cage bracing.
body work/paint.
 

broncomitch

dont be a sheep in a jeep
Location
west jordan,UT
okay, quick update.
I have been way sick for over a week so between that and moving shops and working on the wifes new vehicle, I have done nothing on the bronco..

I did find a guy that had all the np271 part's I needed and orderd my doubler setup at last!!!
I also ordered a few more thing's...
and my rear spring setup will be alittle bit more complicated then I thought...
IMG_4674_zpsfaacbcb0.jpg


IMG_4666_zpsb44414a2.png


IMG_4647_zpsb7284d10.jpg


IMG_4649_zpse067c83e.jpg


IMG_4628_zps09fa6fd1.jpg

the doubler.
IMG_4609_zpsf8303ce5.jpg



but sadly...im $1000 away in part's from finishing it (fuel and driveline part's) and the bronco safari is 5 weeks away, so I don't have enough time to come up with the money to go.... :(
 

broncomitch

dont be a sheep in a jeep
Location
west jordan,UT
Ill find out at the end of April..I was going to back out but it seems like TTC is dying and if I drop out it will hurt my chances to get in another year...if its still around or worth even going.

i don't want to be up against stock ish jeeps or whatever, I want it to be hard core and a crap load of fun!

i should be able to have it done and tested before top truck...I hope.
its hard with being a one man show but time will tell!
 

broncomitch

dont be a sheep in a jeep
Location
west jordan,UT
Well I have all parts I need for the doubler but looks like ill be waiting awile for the case
duffy at D.D. Machine is pretty slow..not to mention impossible to get a hold of!
 
Last edited:

broncomitch

dont be a sheep in a jeep
Location
west jordan,UT
Finally got back on the bronco,
Been sick for 2weeks and rebuilding a old riding lawn mower for my grandpa.


I shaved 1/4" off the 14bolt and welded a skid on the bottom...Should help out with getting hung up I think?


Still waiting on D.D. Machine... Apparently he won't even talk to his customers until the parts are ready and wont answer call backs, I think he worked at ballistic fab lol Frickin joke.


IMG_4795_zps5c745553.jpg



IMG_4792_zpse1f9d34a.jpg



IMG_4789_zpsd2c97552.jpg



This is the mower, it's frickin sweet!!
IMG_4751_zps80315bbb.jpg
 

broncomitch

dont be a sheep in a jeep
Location
west jordan,UT
Well this month sucked. Still no doubler, can't make it to the bronco safari and I didn't get into top truck.

I still couldn't get ahold of Duffy for my doubler witch worked out good cus I found a better setup that's saving me $105 and has LIMMITED LIFETIME WARRENTY on the output shaft! And actually has customer service lol

http://www.behemothdrivetrain.com/s...rain.com/STRONG_BOX_UNDERDRIVE_KITS.html#2934

http://www.explorerforum.com/forums/showthread.php?t=354654

Strong Box + NP 205F = 18.5" - 21" long to center of rear yoke
1:1 Hi / Hi
~2:1 Hi / Low
2.7:1 Low / Hi
5.4:1 Low / Low
2.7:1 2wd Low without modifications to NP205
 

broncomitch

dont be a sheep in a jeep
Location
west jordan,UT
Okay, not much of a update due to "life"
I got done with the mower for my grandpa and he loves it.. I went all out on it and should be a great mower for years to come.
Plus I am currently working 3 jobs and I'm renting a house from "Cody" and I been trying to fix up the lawn wile everything is still growing.
But time and money are against me on everything lol
But things are cinda settling down so I can order a few more parts here soon,


Still waiting on the doubler....he is running behind and redesigned the shifter assembly but should have it HOPEFULLY in a few weeks...but he is giving me some free parts and discounted the others so I can't be toooo upset lol


But here is my To do list.


Rotate bump stop cans.


Put lock washers and spacers on tie rod.


ARP studs on the high steer arm.


Fix alt wires and fix burnt wires under the dash.


Rock sliders tied into cage.


Mount steering cooler and run lines.


Mount doubler to 205 and modify the twin sticks to work.


New Trans cross member.


Skid plates.


Add tube to cage.


Mount and plumb cutting brake.


Build Rear suspension


Weld in fuel cell.


Plumb fuel cell


Try and make a rear drive shaft hoop


Trim body for rear tires


Brace rear bumper


Run rear brake lines


Patch fuel filler neck holes and repaint the body


Drive shafts


Longer wheel studs for rear axle


Mount ATV winch behind rear bumper


Bleed brakes and steering


Fittings for steering and hang HYD lines


Mount and trim new fender


Add fluids through out.
 

broncomitch

dont be a sheep in a jeep
Location
west jordan,UT
It really was..

witch is fine. Ill enter next year and have some seat time in the new rig.

Plus #28 is pretty similar to mine so I can see how they do and what I can do better.

Look out TTC 2014
 

broncomitch

dont be a sheep in a jeep
Location
west jordan,UT
Ok, Ches came over and we got the rear springs hung.

Its just about to become a roller :) lol

I got a very generous donation to help finish the bronco...the donator wanted to be left anonymous.
but I should have enough money to finish the ole girl or dang close to it!

ill post pics of the bronco sitting on the ground in a few
 

broncomitch

dont be a sheep in a jeep
Location
west jordan,UT
Got her on the ground at last! And figured I would flex it out and check everything out.
I only got 46" out of her till the hoist started banging and bending lol


I was expecting more but what do ya do...
Over all I'm very happy and mainly just waiting on the doubler and a few fittings for steering and fuel. Hope to get it running and steering in a week or so.


IMG_5303_zps1f10eb3d.jpg



IMG_5302_zps45509878.jpg



IMG_5300_zpsd215ab29.jpg



IMG_5298_zps5d98ac51.jpg



IMG_5282_zps9af1bae0.jpg
 
Top