toyota only thread
- Thread starter iamsparticus
- Start date
- Location
- Smithfield Utah
Killer Toyota's you guy's! 
sixstringsteve
Well-Known Member
- Location
- UT
oops, I meant kung fu's rig. I've only met nick so far. I st George yota guys confused.
Last edited:
some sic rides! Here is mine.Not nearly as hard core as most of yours. All of them basically stock. Sm lift, little bigger tires.Stock drive minus rear locker...Had to sell the blue 40
and the last is a pic is what got it all started. My dad would have won the mustache contest
and the last is a pic is what got it all started. My dad would have won the mustache contest
Attachments
iamsparticus
Take your Rig to the Edge
- Location
- Ogden,Ut
I dont know the fine details of kung fu's rig but i have read the rules for f-toy many times steve and im pretty sure he would make it. It mainly is the engine and suspension have to be the same as factory and the frame.
BCGPER
Starting Another Thread
- Location
- Sunny Arizona
I thought all F-Toys had to use a Hendrix chassis?
iamsparticus
Take your Rig to the Edge
- Location
- Ogden,Ut
hendrix on stock frame if i remember right
edit: here it is
0.3 Frame
0.3a The frame can be stripped of all cab mounts and brackets but must have a minimum of 3 cross members including one in the very front and one in the very rear.
0.3b The frame length can be shortened in the rear only. The total frame length must not be less than the length of the chassis. 0.3c Frame notching is permitted for shock clearance in the rear, steering arm clearance in the front, and seat clearance below
drivers and passengers seat. A minimum of one of the 4 sides of the frame rail must remain intact.
0.3d Angled or tapered cross members front and rear are legal, frame rails themselves must remain full dimension.
0.3e Frame must be Toyota Pickup or 4Runner frame, 2wd or 4wd
edit: here it is
0.3 Frame
0.3a The frame can be stripped of all cab mounts and brackets but must have a minimum of 3 cross members including one in the very front and one in the very rear.
0.3b The frame length can be shortened in the rear only. The total frame length must not be less than the length of the chassis. 0.3c Frame notching is permitted for shock clearance in the rear, steering arm clearance in the front, and seat clearance below
drivers and passengers seat. A minimum of one of the 4 sides of the frame rail must remain intact.
0.3d Angled or tapered cross members front and rear are legal, frame rails themselves must remain full dimension.
0.3e Frame must be Toyota Pickup or 4Runner frame, 2wd or 4wd
Last edited:
BCGPER
Starting Another Thread
- Location
- Sunny Arizona
Hendrix ON stock frame...
iamsparticus
Take your Rig to the Edge
- Location
- Ogden,Ut
Sorry for the typo.
I didnt see anything saying the chasiss had to be a hendrix but i might of misssed it
I didnt see anything saying the chasiss had to be a hendrix but i might of misssed it
BCGPER
Starting Another Thread
- Location
- Sunny Arizona
I dunno for sure, I've never followed the series that much. I know the cage portion has to be made by an "approved vendor", and Hendrix is the only name I've ever heard associated with the F-Toy series.
iamsparticus
Take your Rig to the Edge
- Location
- Ogden,Ut
maybe nick we be a approved vendor, this is a good question because i want to build one of these, maybe craig will chime in and let us know
1\4elliptic toy
shenanigans!
- Location
- The Dark Side
you can make your own f-toy, it just needs to be to spec with all of the others. Nic's (kungfu) won't qualify because we made a few changes to it, he wanted the f-toy look but not an f-toy.
1\4elliptic toy
shenanigans!
- Location
- The Dark Side
toyota crawlin
Active Member
- Location
- salt lake, utah
Ah I miss the old school!!
kungfufighter06
out of my way bitches!
- Location
- st george
True, I built my chassis. It is designed off the hendrix f-toy. I did talk to Craig and it will be competing in the f-toy class at delta.
BCGPER
Starting Another Thread
- Location
- Sunny Arizona
1\4elliptic toy
shenanigans!
- Location
- The Dark Side
Sorry, I didn't mean old school, I meant in werock or similar.
This is my favorite part of your quote
kungfufighter06
out of my way bitches!
- Location
- st george
Sorry, I didn't mean old school, I meant in werock or similar.
This is my favorite part of your quote
Your right Devin helped me alot
benjijo14
Member
- Location
- West Jordan, UT
I will play too...
First toyota:
2wd with welded rear end in snow was no good...
Sold it and got this:
Drove it for a few years like that. Loved it!
Then upgraded to this
(stock-ish):
(And in its prime):
Loved that truck, but it was time for a bigger back seat.
And here is the new ride as of a few weeks ago:
First toyota:
2wd with welded rear end in snow was no good...
Sold it and got this:
Drove it for a few years like that. Loved it!
Then upgraded to this
(stock-ish):
(And in its prime):
Loved that truck, but it was time for a bigger back seat.
And here is the new ride as of a few weeks ago: