glockman
I hate Jeep trucks
- Location
- Pleasant Grove
I printed two of these this winter and man have they prevented a lot of swearing washing cars this summer.
In action.
In action.
Anyone into 3D printing?
- Thread starter Mouse
- Start date
Corban_White
Well-Known Member
- Location
- Payson, AZ
Determined kid.
- Location
- Never Far From Nowhere
Time for a keyed deadbolt?
ebryson
Active Member
- Location
- Bountiful, Utah
Here is one of my most recent prints. I didn't like any of the phone holders out on the market so I invented my own. I want to make a few adjustments to the angle it holds the phone and it does replace a vent but I'm not using those anyway...
I did break it on accident trying to pry the support off, but luckily I had already decided that the magnet will hold in place.
Here is a cool print in PLA I did for @mbryson a while ago. Some sun and a few months later this is what it looks like. Really shows how important choosing the right material for the job is. If you ask me this is a really cool "failure". I've decided to try my hand at PETG and so far I quite like it. Not has heat resistant at ABS but definitely more than PLA.
I did break it on accident trying to pry the support off, but luckily I had already decided that the magnet will hold in place.
Here is a cool print in PLA I did for @mbryson a while ago. Some sun and a few months later this is what it looks like. Really shows how important choosing the right material for the job is. If you ask me this is a really cool "failure". I've decided to try my hand at PETG and so far I quite like it. Not has heat resistant at ABS but definitely more than PLA.
glockman
I hate Jeep trucks
- Location
- Pleasant Grove
Have you printed any ASA? I have been interested in trying it. Petg doesn't print as clean as pla for me on my super baller ender with no enclosure 🤣
I’ve printed a few rolls of ASA. I recommend a brim and PVB gluestick. No cooling fan and print slower and avoid drafts. All the ASA I’ve printed has turned out with quite a matte finish, but can withstand car interior temperatures.
Resin prints are also non-thermic; so they won’t melt, which is great for high-temp applications; but also means you can’t use heatset thread inserts, but you can superglue them in.
ebryson
Active Member
- Location
- Bountiful, Utah
I have not, I'll have to try it tho. I did notice that PETG is a lot more stringy than PLA.
RockChucker
Well-Known Member
- Location
- Highland
I’ve had good luck with ASA…using the tricks Chance mentions above.
glockman
I hate Jeep trucks
- Location
- Pleasant Grove
Some crank boots for the MTB and some hose gaskets both from TPU.
ebryson
Active Member
- Location
- Bountiful, Utah
Here we go trying new things! Because hood vents look cool and provide some good engine bay cooling I thought I get some, but I don't feel like paying $100 for some metal vents.... so I thought I'd try my hand at designing and printing some. I also tried to design it so it'll just snap in place instead of bolting or riveting it down.
Here is the PLA prototype. Might be good for me to slow the print speed just a tad, but I mostly like the way it turned out.
This is just one side. I was hoping I'd have to shrink it down for build plate purposes but it almost fits to well there. The plan is to print it out of ASA for its heat resistance and uv resist properties.
Here is the PLA prototype. Might be good for me to slow the print speed just a tad, but I mostly like the way it turned out.
This is just one side. I was hoping I'd have to shrink it down for build plate purposes but it almost fits to well there. The plan is to print it out of ASA for its heat resistance and uv resist properties.
glockman
I hate Jeep trucks
- Location
- Pleasant Grove
Drew this up and printed a couple. No more expensive helmets balanced on the seat or jacking up my mirrors.
- Location
- The Land Northward (Bountiful), Utah
UNSTUCK
But stuck more often.
At the advice of my esteemed colleague and mentor, Carl, (or maybe just because he was lazy and wouldn’t do it on his lathe) I’ve come here to ask for help.
I’m tossing around the idea of having someone make a holder for my winch rope loop. Basically a snatch block looking thing. Needs to be 2.5” od with a 1/2” id bolt hole in the center, recessed for a socket head cap screw. 1.25” thick. 1/2” diameter U-groove inside that is 3/4” deep.
Basically like this:
Someone want to try printing one of these for me?
I’m tossing around the idea of having someone make a holder for my winch rope loop. Basically a snatch block looking thing. Needs to be 2.5” od with a 1/2” id bolt hole in the center, recessed for a socket head cap screw. 1.25” thick. 1/2” diameter U-groove inside that is 3/4” deep.
Basically like this:
Someone want to try printing one of these for me?
- Location
- Grantsville, Utah
I just attach a soft shackle to the end of the winch rope and let its knot be the stopper at the fairlead. Every hard object sticking out front of the fairlead will eventually get smashed.
glockman
I hate Jeep trucks
- Location
- Pleasant Grove
I love them. I've had them on every adv bike I've had. Progrip 714's.
Spork
Tin Foil Hat Equipped
- Location
- Saratoga Springs, UT
Something like this?
www.thingiverse.com
winch rope holder by GenMayhem
This is an attempt at a spool to hold a winch rope.
www.thingiverse.com