• RME Gear & Apparel

Grandmas Skylark project

Greg

Greg

I run a tight ship... wreck
Admin
Location
Grand Junction, CO
mbryson said:
That's what I've been reading.

View attachment 148644

Closest thing I can find . Not stamped but cast into the throat
Click to expand...

Looks like its 4150 carb, item #9381, 830 cfm double pumper. There's a list of parts in this link.

Holley 0-9381 830 CFM Competition Double Pumper Carburetor

Holley Competition Double Pumper® carburetors are a perfect performance upgrade for race vehicles. Double Pumper carburetors are an American icon when it comes to performance carburetors. From their roots as the premier carburetor on many factory muscle cars to powering thousands of vehicles...
www.holley.com www.holley.com

Screenshot_20220424-074431_Chrome.jpg
 
xjtony

xjtony

Well-Known Member
Location
Grantsville, Ut
Those should be the part numbers for the blocks themselves. You should be able to look up the blocks on Holley's website. I'm not sure all the differences but there are some between blocks. You should be able to see if those are the blocks that came with the carb or if they've been swapped out.
 
mbryson

mbryson

.......a few dollars more
Supporting Member
Location
Bountiful, land of rocks
lhracing said:
What are the number that are stamped on the metering blocks?
Click to expand...


I'll check the leaking side. Thanks for helping the Holley uninformed

xjtony said:
Those should be the part numbers for the blocks themselves. You should be able to look up the blocks on Holley's website. I'm not sure all the differences but there are some between blocks. You should be able to see if those are the blocks that came with the carb or if they've been swapped out.
Click to expand...

I'll see what I can find out.
 
xjtony

xjtony

Well-Known Member
Location
Grantsville, Ut
yeah there are differences on the metering blocks like plates vs jets on the secondary side, power valve or no power valve and idle adjustment screws or not. I don't know if the plates are sized for the CFM of the carbs though. I'll grab the numbers from my Truck Avenger to see if that helps decipher it.
 
JeeperG

JeeperG

Well-Known Member
Location
Riverdale
mbryson

mbryson

.......a few dollars more
Supporting Member
Location
Bountiful, land of rocks
JeeperG said:
Pretty sure that is not the color your wife wanted? ;)

My brother told me the other day that what I spent on everything to paint my truck is what they spent on just the orange paint from Charlie Hutton for that wagon.
Click to expand...


She'll never like the car even if it is purple. She'll get over it, or not. My guess is not and I'll be doing the car thing by myself like I do the Jeep thing by myself? (she'd probably come on a few poker runs or similar? AC is a need)
 
xjtony

xjtony

Well-Known Member
Location
Grantsville, Ut
mbryson said:
She'll never like the car even if it is purple. She'll get over it, or not. My guess is not and I'll be doing the car thing by myself like I do the Jeep thing by myself? (she'd probably come on a few poker runs or similar? AC is a need)
Click to expand...
Sounds familiar. My wife wont even ride in my Power Wagon and basically has a panic attack at every bump off-road lol. The PW is only really slightly sketchy...
 
mbryson

mbryson

.......a few dollars more
Supporting Member
Location
Bountiful, land of rocks
I Lean said:
Updates?
Click to expand...


I had the first chance to work on it in a couple weeks last night. Have a couple very minor imperfections that will need some putty. (Hope to get those on tonight?)

Lots of sanding still. Pretty boring but necessary stuff. Hope to get last primer on it sometime in the next few days. (whenever the wind is right since I'm priming at home and hope to not sand out a bunch of bugs and/or other debris)

Working on securing a paint booth.

Spent an bunch of $ on base and clear (color committed now)
 
You must log in or register to reply here.
Top