General Tech The Mango Bastard - A Rockwell Buggy story

RustEoldtrux

RustEoldtrux
Location
Evanston, WY
attachment.php
Cat scan. You all thought of it, I just beat you to it.
 
Last edited:

_Auzzy_

Web Wheeling Extraordinaire
Location
Richfield Utah
Tonight's project: check dead center on the motor, add timing indicator to timing cover, zero out motor to indicator, adjust rocker arm backlash, check top dead center, primed motor with oil and priming tool, checked valves again after couple full rotations, re dead centered and zeroed, then added headers and starter for clearance checks. And just for fun I put the tentacles on the electrical octopus

17192476_10212833271689293_5399874885205401997_o.jpg
 

_Auzzy_

Web Wheeling Extraordinaire
Location
Richfield Utah
so weekend update. biggest accomplishment was getting it turned around! sounds simple but it caused cory and i some serious hell. after that i just sat in it to catch my breathe and idea storm while texting.

17218534_1286599018095052_5104713956700932165_o.jpg

So we started the back half and i laced it in while cory built the awesome fan shroud.

17309100_10212872716595391_8109762522629894337_n.jpg17264135_10212872716915399_3668813406219990624_n.jpg17203053_10212872716795396_126215430151479657_n.jpg

also while he was doing that i flexed it out to check shock clearances on the lacing design. 61" to the outside of the tread.

17203116_10212870425818123_688117679944628239_n.jpg17155457_10212870425858124_8893137152884729446_n.jpg
 

_Auzzy_

Web Wheeling Extraordinaire
Location
Richfield Utah
He will be back in nodak next week and i might just scrap it for him while he is gone.

might as well. least keep my atlas.

anywho, little update. got the trans cool mounted with some flat bar fabrication.

17309720_10212891654028815_1004688684462208194_n.jpg

Also got the rear winch/batter mount are figured out and burned in.

17155454_10212891653868811_3136842584232201980_n.jpg
 

Ashcat

Active Member
Location
Wisco
still have a waaaaaays to go. wiring ,brake lines,axle shafts, shocks, endless.
Stupid build lists. I stopped writing them. Sounds motivational when you think you're getting close until you add it up. F! I'll never finish. Haha. Keep at it, it's turning out great.
you going to do OSRC?

Any word on when or who will host the preregistration? I'd really like to make that my goal so I only have to worry about Friday and Saturday and just having fun.
 

Coco

Well-Known Member
Location
Lehi, UT
Any word on when or who will host the preregistration? I'd really like to make that my goal so I only have to worry about Friday and Saturday and just having fun.

Not yet, I am sure Craig will post it up in the OSRC section when that is finalized. My guess though, is it will probably be back at Armor, but I'd prefer LROR again for the amount of room and parking, plus at Armor, you're trying to fight traffic on redwood to head home.
 
Top