Search results

I think Amy is Phil Collards Daughter. Yep, from Farmingto NM.

Yep, that is what Brandon is running, as well as most comp guys. The Rev 60 really has not been a problem in the rear, even under extreme abuse. The 60 r/p is strong enough the 20% lost by running on the coast side of the gear does not seem to be an issue. I would be a little afraid of extreme...

I was think sami as well, maybe soa with 33's.

I want to go, but I have to work Friday. Anyone want to drive down after work on Friday??????? Marc

Ski, want some ramsey stories? A friend of mine lost a truck due to a ramsey. He was winching up a hill , almost to the top, switch pushed still spooling in, all of the sudden everything let go, winch unspooled, as if in free spool, and the truck was gone!! I believe the gears in the winch...

WARN WARN WARN WARN WARN WARN WARN!!!!!!!!!!!!!!!!!!!!!! I HAVE HAD EXCELLENT SERVICE AND PERFORMANCE FROM MINE!! I did break the mounting foot on an old 8000 I had during safari one year. Went and talked to the rep at the show. He said he would take care of it. He took my name and...

I really can't remember the #'s, The only thing that comes to mind is 30 or 31. I will see if I can find some of my old one, and get the #'s off of it.

You buy each size individually, but they are cheap, so get the next 2 or 3 sizes.

Just go get the rebuild kit, make sure to change the needle and seat. Just set the float a little lower than the kit says. You might play with it a little to get it right. I kinda have feeling for it after a ton of rebuilds. Then if it feelsa little slugish, up the jets a step. You can email me...

Mcness/Racer enterprises on 300 W and about 1380 S should have one in stock. It is right behind the Zionz bank on the west side of 300 W, just South of the 6 states shop. Or pick up a circle track magizine and order it from whoever is cheapest.

You got it, slow and easy, liberal amounts of cutting fluid. Cast knuckle drill easily. Go slow and check it often, don't take too much out. Where did you get the reamer? Circle track suppliers have them cheap, under $100.

A friend of mine has had them for 5-7 years. Work great, even on his 16" rims. I think he had one develope a leak and had to patch it. No biggy. I think they are a good option if the price has come down. $700 is a lot less than he paid.

HOOOOOOOWDY! Hope you don't scare easily!

Those, as pictured, would not fit an XJ. XJ shackles fit up into a socket, not over a hanger as the one pictured. Second, it has been my experiece, especially on XJ's, that rubber bushings are best. XJ's have very large rubber spring bushings, and the rubber transfers less noise/vibration to...

I ran the motorcraft 2 barrel on mine for 14 years. I loved it!!!! I ran it on 3 different motors, stock 302, very hot 302, mildly pumped 351w. I did play with jets depending on the motor. They are simple carbs that work about the best at angles. Rebuild the carb, set the float just a little...

Yes, no, well I don't know!! Yes, some trails are now boring, but now I look for harder lines and new extreme trails, but I still have fun on easy trails, just to be out there, to intro newbies to it, and simply wheel. A lot of the fun for me is the modifying, building, and testing. I...

Yep, his black ones are the pcm's Marc

Sorry, a little late, but........ I have used a ton of different hiems in many applications. Stay away from the tractor parts. They are sloppy to begin with, are cheap cast metal, and wear very quickly. The $15 from Mcness are ECM (economy grade) they get sloppy and are not very strong...

What system is it? Old open loop/cab adjustable or the newer closed loop system. I have fixxed a ton of the old style systems, there are a few tricks. I run one on my Bronco. It is not the best injection, but it can work with a few tweeks. An aftermarket air/fuel gauge helps when adjusting or...

The boat rubber stuff is cheap! You can also get the plastic EZ is talking about at NPS, ussually.