anderson750
I'm working on it Rose
- Location
- Price, Utah
carb issue should be simple, rekluse on the KTM is a little different then my kx where it is hydro. Im sure we can figure it out. might just be way out of adjustment.
If you need to go through the carb, get a bottle of ammonia and soak all the brass parts in it for 20 minutes. Make sure you also take out the needle jet that goes through the center of the carb, the orifices on it will easily plug up. After the parts have soaked rinse them with water and blow them out with a compressor and inspect for any blockages. Clean all the passages in the carb by spraying cleaner through them and blowing compressed air.