Search results

Heard the same ad on KSL the other day.

'99 Dodge Ram 2500 Quad Cab Cummins Auto with 2" lift and Edge Comp.

I've got one that I've had for about 1-1/2 years - seems to work just fine. My corneas don't feel burnt, and I seem to be able to see still. I wouldn't hesitate to get one - much easier to weld with.

Just here to help where we can!!!:D

I've been running a set of 37" MTR's on my 4Runner for about 3 years - 22RE and 5.29 gears. Some limited street mileage and alot of trail. They are still 3/4 tread, and the stock Toyota axles have held up to them pretty well (only broken 2 stock birfields in 3 years). They wear well on the road...

I put a spool in the rear of my 4Runner about a year and a half ago. Even though I rarely drive it on the street I still don't really like the spool. It's harder on tires, noisy, and tons of body roll when turning corners on the road. It really tweaks the suspension from side to side. I would...

I took the resonator and muffler out of my '99 Dodge Cummins a couple of years ago with no issues, other than a little hassle at safety inspection time. I just put on an AFE 4" exhaust kit and it only has a muffler - no resonator.

So for those of you that have broken Detroits, how did you know it was broken? I've had one in the front of my 4Runner for about 3 years. Lately my steering has been really tough. I'm putting in 30 spline Chromoly Longfields right now, so I pulled the third member to check out the Detroit...

Tried HF the other day but they didn't have any. Guess I'll have to check back in a few days. Thanks.

I got a Parts Washer for my birthday!! Now I need to get some solvent for it. What kind of solvent should I get, and where's the best place to get it?

AMEN Jinx...My thoughts exactly. I'll chip in another $20 if it helps you get your truck fixed Coreshot. I've gotten in people's faces several times for speeding through our neighborhood. Luckily I haven't been harmed by doing so. The possibility exists, but if (heaven forbid) one of my kids...

Thanks guys!!!

Looking to take the family sledding/tubing and need a good place to go. Prefer somewhere we could take a 3wheeler with us to pull the kids back up the hill, and somewhere that's not too crowded. Anyone know any good spots that you wouldn't mind sharing? PM me if you want to keep it low-key...

I would go and talk to Zane at Wide Open Performance - they're around 8500 South Sandy Parkway in Sandy (just west of I-15 and north of 90th South. I've dealt with Gillette and Wide Open and the difference for me was night and day - Price, Customer Service, Quality of Work - all way better at...

I think if it was me I'd look into running Propane and stick with the Carb. Replacing the head, intake, wiring harness, etc. seems like a pain to me. I'm thinking a dual-fuel propane setup would be great. Run on gas until you get to a steep climb and then switch over to the propane. Just another...

Send me a price too!

Just wondering where everyone goes to get their propane tanks filled - preferably in the south end of Salt Lake Valley. Who's the cheapest/easiest to deal with?

I have a '99 Quad Cab 24V Auto with 35's on it - lately I've been getting 18.5 mpg unloaded and 14 to 15 pulling. My truck has 106K miles on it and the auto is still working fine (knock on wood). I have an edge comp chip on my truck but I keep it at the lowest setting and don't get too into the...

Is it an automatic or standard tranny? I think if I was going to go to the trouble to swap a different engine in I would go with a 4.3 Vortec. Probably no more work than swapping a 4 cyl. 22RE. Since the 22RE was available in the 'runners from '90-'95 you should be able to swap on from any of...

I've had my HF jack for close to 6 years I think and it still works great...haven't even had to add any hydraulic to it yet. But yes sometimes HF is a roll of the dice.