Search results

Poo.... ROTFLMAO Many of us have worked and competed for Poo, glad to see alot of people are rid of Poo!! Now Patey's have Poo all over them!!!! I hope Poo can read....

Suka B is hooked up with them, PM him onthis board or email @ brandon@anarchyoffroad.com

From the rope side of Blacky, they were the stickiest tires I have seen, at least as sticky as the BFG's. The side walls were stiff at first, but we took care of that. Much better than the SSR's IMHO. They are super soft though and would not fair well on the road, after only a few burns on the...

I left the digi camera at home, sorry...So YES, get off the computer and drive to St George! BTW 39.5x13.5x17 IROK's with??????????

We mounted B's tires last night. Very cool, very BIG! Put the hood on tonight, and it should be ready.... Just hope he doesn't run over me!

We stayed at the Microtel the last few times. Reasonable and ussually have rooms.

82-83" frt, little narrower rear, full width 60 frt, 9" rear.

That tube goes into the frame aout 10". It has a little bend in it, combined with the bend in the frame, it wedges between the top insideand bottom inside of the frame rail, a couple of gussets inside the frame, and then a plate to cap it off..... I like to over build and screww with people...

went and took some pics at lunch.

I'll have to take some tonight

Andys is very similar to what we did on B's and mine. But on mine I inserted the tube into the frame (wedged) and built cap plates around the tube.

B has a used MORE crossover bracket.

"who?" Matt Holm (HPC) Sorry about the hijack!! Welcome to the Board and the 'hood. If you see a bunch of trucks/rigs at a duplex, stop by and have a beer. Marc

We should have a nieghborhood party. It already looks like a Moab parking lot around here (trailers, rigs, towrigs,etc). Holmer lives in the other side of the duplex now.

Holladay is cool!

Yep, 4 equally placed self tapping screws just around the middle diameter.

Motor ok trans? tcase nothing special hub/rotor good for disc brake conv. IIRC '85 is a split year for 9"/8.8 Yes, some TTB Broncos had 9" I have a friend that needs the tailgate. Marc

It is just a big x/z/t/J frt suspension sort of thing. Pretty much any thing that we have discussed about DW in the past on those vehicles, applys here. Personal experience say check ALL ends (tierod/dlink/tbar/c-arms) if there is play, replace them. Next ball Joints and wheel bearings. And...

on a DD and especially a uni-frame/body, I would use big rubber bushings. Less noise and better ride. I used heims, but probably would only use the on the axle end in the future. If I link my wifes XJ, I will use frt/lowwer stock style bushings. The POR threads have a lot of good info...

You can build the 4 link to counteract the bodyroll on the side hill.... Do some research before you attempt a 4 link on your own. Tons of variables, and nothing is IDEAL!!!!!!!!